10 Hardness Stabilizing Unit for Pacific Systems

Consistent water quality Type 2 laboratory water meets ASTM Type II, CSLS-CLRW and ISO 3696 international standards The LabTower is designed to continuously recirculate purified reservoir water to preserve water quality even during periods of inactivity Compact mobile design Two system options with permeate flows of 20 or 40L/hr Stand-alone design with integrated 100 L reservoir takes up zero bench space. Castors allow easy re-location Systems can be upgraded later to accommodate growing water demands Two ways to dispense water Dispense directly from the system via the dispensing valve for calibration solutions, reagent preparation, filling of containers, general rinsing purposes, etc. Dispense from the reservoir to supply autoclves, dishwashers, ultrapure water sytems, etc. Integrated 100L reservoir Up to 100L of high purity water ready for dispensing when needed High purity polypropylene reservoir is opaque to light Conical bottom allows complete emptying for efficient cleaning and disinfection Adjustable setting for reservoir volume can be programmed for times when demand is low, allowing you to only store water that you can use Clear information on system display The large four-line display is code-protected to prevent accidental changes in system settings Illuminated and easily readable, the display provides information on resistivity or conductivity, operating mode status, such as "“roduction”, “stand-by” or sanitization, and volume of the reservoir in % GLP-compliant documentation LabTower TII has been developed to meet or exceed GLP requirements Recorded and traceable data can be obtained by print-out via the RS-232 interface and accessory printer Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 0.01 cm-1 to an accuracy of ±0.1°C Pretreatment 5µm prefilter and activated carbon in the combi-filter cartridge protects the RO membrane from free chlorine andparticles Hardness stabilizing cartridge protects the reverse osmosis stage from hard water Reverse osmosis and reservoir Pretreated water is pressure-forced through the permeable reverse osmosis module removing 97- 99% of all inorganic ions, 99% of dissolved organic substances as well as microorganisms and particles The built-in 100 L reservoir has a conical bottom outlet to optimize cleaning and sanitization Ion exchange and UV RO membrane removes up to 99% of impurities. All remaining ions are removed by the low TOC, high-purity Resins in the ion exchange cartridge. Irradiation with UV lgiht (TII unites with UV option only) eliminates any bacteria or germs that are present