10mm Single Cell Holder with Baseplate

A wide range of accessories for specialized sample handling is available for the GENESYS 10S spectrophotometers. Choose cell holders for vials or long path cells, add a sipper kit to eliminate handling of cuvettes, or thermostat your sample with circulating water or an air-cooled Peltier accessory for specialized or life science applications. We also offer a range of consumables including replacement paper rolls and new self-stick printer paper for the on-board printer on certain GENESYS models, cuvettes, replacement lamps and pump tubing. Contact your Thomas Scientific representative for specific questions. 335916-000 (Thomas 0880A48) 10mm Single Cell Holder with Baseplate Holds one 10 mm path square cuvette 840-202100 (Thomas 1189N77) 10mm Single Cell Holder w/ Aluminum Base Aluminum base, for enhanced cell position stability when using sipper, fiber optic or nanoCell accessories Holds one 10 mm path square cuvette 840-202300 (Thomas 1189N78)  50mm Cylindrical Cell Holder w/ Baseplate Holds one cylindrical cell up to 50 mm pathlength, 22-25 mm diameter 840-202400 (Thomas 1189N79) 50mm Rectangular Cell Holder w/ Baseplate Holds one rectangular cell with 10-50 mm path length, 12.5 mm wide 840-202500 (Thomas 1189N80) 100mm Cylindrical Cell Holder w/ Baseplate Holds one cylindrical cell up to 100 mm path length, 22-25 mm diameter 840-202600 (Thomas 1189N81)  100mm Rectangular Cell Holder w/ Baseplate Holds one rectangular cell with 10-100 mm path length, 12.5 mm wide 840-202700 (Thomas 1189N82)  Test Tube Holder with Baseplate Holds test tubes up to 18 mm in diameter and 75-110 mm tall. Also holds COD reagent vials. 222-238100 (Thomas 1230Y35) Peltier Accessory (Air-Cooled) For GENESYS 10S, BioMate 3S and Evolution 60S instruments Temperature range: 20 to 60°C Temperature accuracy: ±0.1°C Temperature reproducibility: ±0.05 °C No Temperature ramping Air cooled - no external connections (does not use fluid recirculator) Sample Stirring speed: 250-2000 rpm Holds one rectangular cell with pathlength = 10 mm, z-height = 8.5 mm Includes: Stirring bars 840-206700   (Thomas 1189N83) Rectangular Cell Holder Used to control the temperature of one 10 mm pathlength square cuvette within the range of the recirculator 335917-000 (Thomas 8421A68) Adjustable Filter Holder Accommodates glass or plastic filters up to 50 mm long x 80 mm tall x 10 mm thick Requires: Baseplate for accessory mounting 335428-000 (Thomas 0880A64) Film/Filter Holder Accommodates filters/lenses up to 50 mm long x 80 mm tall x 1-8 mm thick Requires: Baseplate for accessory mounting 699-119600 (Thomas 1189N84)  Economy Sipper System - Flow Rate, VIS Complete economy sipper system for measurements in the visible region System includes: Peristaltic pump with adjustable flow rate, US power cord, Glass flow cell, 335921-000 Accessory Door Kit, and 335971-000 pump tubing 699-119900 (Thomas 1189N85)  Economy Sipper System - Flow Rate, UV-VIS Complete economy sipper system for measurements in the UV and visible region System includes: Peristaltic pump with adjustable flow rate, US power cord, Quartz flow cell, 335921-000 Accessory Door Kit, and 335971-000 pump tubing 840-230500 (Thomas 1189N86)  Interconnect box for Economy Sipper Used to connect computer running VISIONlite 5.0 or later to the stand- alone Economy Sipper for the GENESYS and BioMate spectrophotometers CE labeled Not UL/CSA labeled at release - label is not required for sale unless required by customer. Verify for government purchases Includes: necessary cables Requires: Economy Sipper Pump, VISIONlite 5 or later 840-259800 (Thomas 1189N87)  Self Stick Printer Paper 80mm width Use with thermal printers for: GENESYS 10S BioMate 3S Evolution 60S SPECTRONIC 200/200E