6' PC PS A2 w/ Ops 10 115V

PuriCare Procedure Stations provide personnel, animal and environmental protection. They are specialized Class II, Type A2 biosafety cabinets that create a particulate-free environment for conducting small animal research activities including cage changing, weighing, anesthesia delivery and surgical procedures. During operation, room air is drawn into the grille located in the air foil and passes into a plenum located under the work surface. This inward airflow protects the operator by preventing the escape of particulates inside the enclosure. The blower draws the air from the work area through the back plenum of the enclosure, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. This HEPA filtered vertical laminar airflow provides ISO Class 5 conditions that protect the animals from environmental and cross-contamination. After passing through the exhaust HEPA filter to protect the environment from allergens, the balance of the air inside the enclosure is discharged to the room. All models feature: Nominal inflow velocity of 105 feet per minute (fpm) Nominal downflow velocity of 55 fpm (models with 10" sash opening) and 60 fpm (models with 12" sash opening) Approximately 70% air recirculation Interior-mounted, line-of-sight LCD information center with "Filter Life Remaining" bar graph, status line for alarm conditions and alerts to warn when filter life diminishes to 20% and 0% Electronically Commutated Motors (ECM) Constant Airflow Profile™ (CAP) Technology airflow monitoring system that communicates with the ECM to deliver the precise volume of air as required and automatically adjust as filters load without relying on airflow sensors Smart-Start™ System that allows the user to program start up and shut down operations Night-Smart™ System that idles the blower when the sash is fully closed Contain-Air™ Negative Pressure Channel* Built-in interval or elapsed timer for experiment monitoring, LED (fluorescent on 12” sash opening models) light or UV light control (on models with UV light) ADA-compliant touchpad control on right-hand side post for manual activation of blower, light(s), timer, electrical receptacles, audible alarm mute and menu selection Radiused type 304 stainless steel interior and removable, seamless, dished work surface with lift out knobs Powder-coated steel exterior Removable towel catch with washable screen-type prefilter located under work surface ISO Class 5 conditions per ISO 14644-1 and 2 Supply and exhaust 99.99% efficient HEPA filters (Contact Customer Service for optional 99.999% efficient ULPA filters) Two electrical duplex receptacles (single outlets on 230 volt models), located one on each side, with ground fault interruption (115 volt models) and flush-mounted stainless steel splash covers with dampened hinges Fully-closing, clear 1/4" tempered safety glass sash with two sash handles; counterbalanced, anti-racking mechanism; and 10° slope 22.6" (57 cm) sash opening and 27.0" (69 cm) viewing height Curved stainless steel inlet grille with Reserve-Air™ Secondary Airflow Slots* Bright, 90-100 footcandle, glare-free LED lighting (fluorescent on 12” sash opening models) located outside the contaminated work area Intrinsically-safe negative pressure design Electronic security lock (optional activation) that requires code to operate the cabinet Full five year warranty on parts and service (excluding filters) * U.S. Patent No. 6,368,206