Amber Glass Storm Water Sampler, 1000 ml

Unattended first flush grab sampling for organics or inorganics EPA compliant Ditch, grate or stream mounting HDPE or glass bottles EPDM gasket Storm Water Sampler collects a full one liter first flush grab sample into a 1000 mL Nalgene® HDPE sample bottle within the first minutes of storm water outfall flow. Sample bottle is leakproof when closure is applied. Sampling device intended for one-time use. Ideal for collecting samples for inorganic analyses.  Amber Glass Storm Water Sampler is specially designed for organic analysis. Fluorinated upper structure prevents oil and grease from sticking.  Floating ball valve automatically closes off sample port after bottle is full to prevent commingling with later run-off and volatile analyte loss. Meets EPA NPDES MSGP (Fed. Reg. FRL-6880-5 10/20/00) and most state general permit grab sampling requirements.  Sampler bottles are for use with Storm Water Mounting Kit. Storm Water Sampler Mounting Kit tube can be positioned in storm water ditch, stream or grate outfalls. Collects only runoff [MDASH] not the rain - when mounted in ditch or stream outfalls. Use the wire hanger and carabiner-style snap to suspend the tube from a storm grate. For stream or ditch mounting, position the steel stake or a T-post in the outfall, and secure the mounting tube using the stainless steel worm clamp. Position once, and reload with disposable HDPE or glass samplers. Complete installation instructions included. Kit includes UV stabilized high-density polyethylene tube, 24 in. steel stake, stainless steel worm clamp and lanyard, nylon rivets, polyester screen, wire hanger and carabiner-style snap.