Bullet Hole Test Kit

A portable laboratory for rapid ID of bullet holes. The identification of bullet holes may be very important in the investigation of criminal cases involving the use of firearms. These bullet holes are usually characterized by the presence of metals (mainly lead and copper) originating from the bullet’s outer surfaces in the margins of these holes. Using our Bullet Hole Testing (BTK) Master Kit can help the investigator identify the caliber and direction from which the bullet was fired. The test is performed by applying a few drops of reagents on Benchkote™ paper (plastic-backed filter paper) and applying it to the suspected bullet hole. The test reagents are contained within glass ampoules in specially designed protective plastic tubes, making the process safe for the operator, as there is no direct contact with the chemicals when the ampoule is broken. The 4-step process takes 3-4 minutes from the time of sampling until final results are obtained, enabling quick screening of large numbers of suspected bullet holes. The kit has been designed for simplicity of operation and can be used at a crime scene by any technician or non-scientific personnel with some basic training. Several bullet holes can be examined at each crime scene using only one set of test tubes. KIT CONTAINS:  1) Kit Case (10.4” W x 13.1” L x 3.33” H) 10) Lead Solvent Ampoules 10) Lead Reagent Ampoules 10) Copper Solvent Ampoules 10) Copper Reagent Ampoules 50) Benchkote Test Papers 100) Plastic Bags (for packing the positive test papers) 4) Technician Report Forms 1) White Photographic Scale 1) Permanent Marker