Cell Factory 10 Chamber Sterile PS 6,320 cm2 total

Growth kinetics unaltered from laboratory scale culture Sterile, Nunclon® ? Fewer operations per unit of growth surface Reduced contamination risk Space-saving, compact design All cultivation parameters are same in flasks and cell factories Easily adapted to manpower and facilities available Lower total production costs Designed for the cultivation of large quantities of cells, particularly for reproduction of vaccines and fibroplast interferon. Sterilized by gamma radiation. Consist of a series of polystyrene trays, treated for improved cell attachment and growth, sonically welded together to form sealed culture chambers sharing common vent and fill holes. Each chamber has a flat growth surface of 6,320 cm 2 . Unit design allows all chambers to be filled with exact volumes of media. Channel ports are fitted with caps (included) which have air-permeable, peel-off seal. See 9383X10 start-up kit for additional accessories. Recommended minimum volume of medium 1,800 mL. Overall dimensions: 335 x 205 x 190 mm high. 1-Chamber (9383W75) Consists of two trays sonically welded to form one chamber Culture area 632 cm 2 Recommended minimum volume of medium 180 mL. Overall dimensions: 335 x 205 x 37 mm high; without bacterial air vent (see 4650C90) or tubing connectors (order 9383X16). 2-Chamber, Sterile (9383W80) Consists of three trays sonically welded to form two chambers Total culture area 1,264 cm 2 Recommended minimum volume of medium 360 mL. Overall dimensions: 335 x 205 x 52 mm high; without bacterial air vent (see 4650C90) or tubing connectors (order 9383X16). 4-Chamber, Sterile (9383W82) Total culture area: 2528 cm 2 Recommended working volume is 800 mL 4-Chamber, Sterile (9383W91) For sealing fill/drain channels on Nunc Cell Factories Sterilized by gamma radiation Individually wrapped Sterile Polyethylene Cap (9383W92) For sealing fill/drain channels on Nunc Cell Factories Sterilized by gamma radiation Individually wrapped Start-Up Kit (9383X10) This sterile kit contains everything needed to operate the cell factory including HDPE cell factory connector, caps, bacterial air vent, tubing and clamp. Tubing Connector, Elbow Type (9383X16) Polypropylene, L-shaped, with "O"-ring One end fits into top of channels on Nunc Cell Factories, opposite end serrated to take tubing 6- to 10-mm (1/4 to 3/8 inch) bore Packaged under aseptic conditions Accessories (9383W14, W16, W84) Sterile Bacteria Air Filter Cell Factory Manipulator Handling Systems