TLC Adsorbents

Carbotrap &#174 /Carbopack &#8482 adsorbent can withstand high bake-out temperature without losing the mechanical and chemical integrity. It has a high affinity for isoprene and does not retain significant amounts of water.

Carbotrap &#174 X has a very high specific surface area and was used for the recovery of low boiling hydrocarbons like 1,3-butadiene and isoprene. Carbotrap &#174 /Carbopack &#8482 adsorbent can withstand high bake-out temperature without losing

Carbotrap &#174 /Carbopack &#8482 adsorbent can withstand high bake-out temperature without losing the mechanical and chemical integrity. It has a high affinity for isoprene and does not retain significant amounts of water.

Features More than 50 different sationary phases available e.g.

Features More than 50 different sationary phases available e.g.

Cyanopropyl modified silica phase for SPE Features Base material silica, pore size 60 &Aring, particle size 45 &microm, specific surface 500 m2/g, pH stability 2&ndash8 cyanopropyl phase, carbon content 5.5 %, polar to mid-polar In addition to

Propylcarboxylic acid modified silica cation exchanger for SPE Features Base material silica, pore size 60 &Aring, particle size 45 &microm, specific surface 500 m2/g, pH stability 2&ndash8 propylcarboxylic acid modified silica, weakly acidic cati

Quaternary ammonium modified silica anion exchanger for SPE (SAX) Features Base material silica, pore size 60 &Aring, particle size 45 &microm, specific surface 500 m2/g, pH stability 2&ndash8 silica modified with quaternary amine strongly basic

Florisil, adsorbent for the separation of lipids, is a commercially-prepared magnesia silica gel. It has a coarse mesh size which helps in rapid flow rate.

Florisil, adsorbent for the separation of lipids, is a commercially-prepared magnesia silica gel. It has a coarse mesh size which helps in rapid flow rate.

Florisil, adsorbent for the separation of lipids, is a commercially-prepared magnesia silica gel. It has a coarse mesh size which helps in rapid flow rate.

Porous polymers are the most suitable adsorbent for applications based on the analysis of gases, acids, amines, organics of low carbon number and water. They are best suited for gas chromatography and are basically copolymers of polydivinylbenzene