close-it maxi control seal, 150x150 mm, white

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner. close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/ paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together. The label is not just used to provide a hermetic seal. It is also used for providing quality control information (sampling date, release yes/no, name of tester, etc.). The labels are available in different colors. With printing in red, blue, green, yellow, black, neutral, without printing in white. close-it can be written on with ball-point pen, pencil or felt-tip marker. The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick. close-it – standard size 95 x 95 mm close-it Maxi - 150 x 150 mm, for larger holes or longer tears in containers The labels are supplied in handy rolls The cross perforations allow each label to be separated from the roll individually