Conductive silver printing ink (C09-0826-508)

Description：Sheet Resistivity is 2.0 - 2.4 μΩ/ square / mil. (at a 180°C cure temperature)Use this Conductive Silver Ink to achieve exceptionally high conductivity at low cure temperatures when printing on a variety of substrates, including glass, polyesters (PET/PEN), and ITO/FTO coated substrates.This Conductive Silver Printing Ink is a specially formulated ink which provides exceptionally high conductivity at low cure temperatures. This highly conductive ink provides extremely low resistance printed conducting tracks, essential for the photovoltaic applications. By providing the lowest track resistances of printed current collectors, this material is a key enabler in plastic electronics, such as, DSSC, OPV, and CdTe solar cells.Product description：This product is a low temperature sintered conductive silver paste using nano silver powder as medium. It has the characteristics of high thermal conductivity and high electrical conductivity, and the working effect Long.Application：Mainly used in photovoltaic, electronic and other fields of low resistance wire printing. It can also be used in third-generation power semiconductor devices, high-power light-emitting diodes (leds), high-power chips, optical communication TO devices, high-power modules and other occasions that require high thermal conductivity, electricity conduction and bonding.  Usage:A) Preparation work: 1. Before opening the lid: After taking out the silver paste in the freezer, place it at room temperature (about 25℃) for more than one hour; 2, open the lid, be sure to avoid water droplets outside the container immersed in the tank, because the inner wall of the container leakage frost into the water gas, mixed with water gas or water droplets Will affect its characteristics; 3, viscosity adjustment: do not adjust the viscosity, the addition of any solvent may affect its characteristics. B), use: Precision printing presses are recommended. C), operation guidance: 1) Conductive silver paste is a paste substance, after opening the lid, it is recommended to shorten the exposure time in the air as much as possible; 2) Maintain sufficient wettability between the silver paste and the substrate to ensure sufficient adhesion. Specifications and Purity: Volume resistivity 5.5*10-6 Ω·cm. Related Document: https://ald-pub-files.oss-cn-shanghai.aliyuncs.com/aladdinsci/pdp/sds/1/C487450-SCI_3bf3598adb16f7c085590304cab66299.pdf.