Cyanide (Free) CHEMets Kit, 0-0.1 & 0.1-1 ppm

Cyanide is used in many chemical and refining processes. It is found in effluent from electroplating and metal cleaning operations, coke ovens, steel manufacturing facilities, and gas scrubbers. Although cyanide can be safely removed by alkaline chlorination, its acute toxicity to aquatic life necessitates routine monitoring of effluents. The Maximum Contaminant Level for free cyanide in drinking water is 0.2 mg/L. CHEMetrics’ cyanide test kits are applicable to the monitoring of effluents and surface water supplies. It is recommended, however, that the sample be distilled and hydrogen sulfide be removed prior to analysis. The Isonicotinic-Barbituric Acid Method Reference: S. Nagashima, Spectrophotometric Determination of Cyanide with Isonicotinic Acid and Barbituric Acid, International Journal of Environ. Anal. Chem., 1981, Vol. 10, pp. 99-106. In the Cyanide CHEMets® and Vacu-vials Kit, chlorine is added to a sample that has been buffered to pH 6. The resulting cyanogen chloride reacts with isonicotinic and barbituric acids to form a blue color. Results are expressed as ppm (mg/L) CN. This chemistry provides two advantages over the more commonly used pyridine methods: (1) The shelflife of the reagent is extended, and (2) the analyst is not exposed to noxious and hazardous fumes from the pyridine reagent. Kit comes in a plastic case and contains everything needed to perform 30 tests: Refill, Low and High Range Comparators, Neutralizer Solution, Activator Solution, 25 mL and 1 mL syringe sample cup & top, and instructions. Range: 0-0.1 & 0.1-1 ppm MDL: 0.005 ppm Method: Isonicotinic-Barbituric Acid Shelf-life: The Accessory Solution Pack (A-3810) contained in this kit has shelf-life of 8 months. A-3810 Acccessory Solution Pack that includes: (A-3801), Activator Solution two 10mL bottles and (A-3805), Neutralizer Solution four 20mL bottles