Edge-Flaring Tool (30 mm and 40 mm)

Shallow, thin-walled aluminum cap for reinforcing XRF pellets. Commonly used in the production of pressed power sample disks for XRF but also used for OES and other analytical techniques. Forms the bottom and sides of the finished pellet. Features Makes sample disks easier to remove from the pellet die Minimizes contamination during sample handling Protects the bore of the pellet die from abrasive samples Painted outer surface prevents seizure in the die and facilitates labeling 33 mm Spec-Caps 33 mm wide x 8 mm deep Produces pellets 35 mm x 5 mm Compatible with 3616 35mm Evacuable Pellet Die Set Can be used in conjunction with 3625 Edge Flaring Tool to achievea tighter fit in the pellet die 38 mm Spec-Caps 38 mm wide x 9 mm deep Produces pellets 40 mm x 5 mm Compatible with 3614 40 mm Evacuable Pellet Die Set Can be used in conjunction with 3618 Edge-Flaring Tool to achievea tighter fit in the pellet die 30 mm Spec-Caps 30 mm wide x 8 mm deep, for 3623 die Produces pellets 31 mm x 5 mm Compatible with 3623 31 mm Evacuable Pellet Die Set Can be used in conjunction with 3618 Edge-Flaring Tool to achievea tighter fit in the pellet die Edge-Flaring Tool Tool for flaring the edge of Spec-Caps® to create a tighter fit in the pellet die. To use, simply press the tapered end of the Edge-Flaring Tool into the compatible Spec-Cap®.