Elma Lab Clean A20sf-10L

Elma Lab Clean N10 neutral ultrasonic cleaning solution Elma lab clean N10 is formulated for gentle ultrasonic cleaning of sensitive surfaces.  The biodegradable solution has a neutral pH and can safely be used to clean a wide variety of materials including aluminum and its alloys.  No residue is left behind after rinsing with water. Ultrasonic cleaning concentrate for sensitive metals, plastics, and glass Removes coolant, grease, oil, dust, fingerprints, and lime soaps Ideal for cleaning aluminum prior to anodizing or coating Contains no silicates and rinses residue-free Use in an ultrasonic cleaner or labware washer Use Elma lab clean N10 for cleaning newly manufactured medical instruments, instruments made of aluminum and light metals, and labware made of metal, glass, ceramics, and plastic. The cleaning solution removes lime soaps, light oils, grease, and fingerprints. Elma lab clean N10 also removes residues of markings and labels. Elma lab clean N10 is highly concentrated and should be diluted to 1-2% with water before use. A 10 liter bottle dilutes to 132 gallons of 2% solution.  Dilute to 2% for use in an ultrasonic cleaner and to 1% for use in a labware washer. Oil and grease removed from parts will separate and float on the liquid surface where they can be skimmed off. Safe and cost effective, Elma cleaning solutions prolong the lifetime of your ultrasonic bath.   Elma tec clean A1 Ultrasonic Cleaning Solution for Electronics, Optics, and Plastics Mildly alkaline cleaning concentrate Cleans electronics, printed circuit boards, electromechanical components Cleans glass, ceramics, plastics, and fine optics Rinses residue-free Use Elma tec clean A1 in an ultrasonic cleaner to remove polishing suspensions, grease, oil, activated fluxes, fingerprints, and dust. This solution also removes residues left by tea, cola, and milk. Biodegradable Elma tec clean A1 is highly concentrated and should be diluted to 3-10% with water before use. A 10 liter bottle dilutes to 53 gallons of 5% solution. Safe and cost effective Elma cleaning solutions prolong the lifetime of your ultrasonic bath.   Elma tec clean A4 Universal Ultrasonic Cleaning and Degreasing Solution Alkaline ultrasonic cleaning and degreasing concentrate Cleans metals, glass, rubber, ceramics and alkaline-resistant plastics Removes cutting and machining coolant, grease, oils, soot, carbon, wax, polishing media, fingerprints, and dust Elma tec clean A4 is a good choice when cleaning parts composed of several different materials or when removing a variety of contaminants.  Oil, grease, and wax removed from parts will separate and float on the liquid surface where they can be skimmed off. Biodegradable Elma tec clean A4 is highly concentrated and should be diluted to 2-5% with water before use. A 10 liter bottle dilutes to 132 gallons of 2% solution. Safe and cost effective Elma cleaning solutions prolong the lifetime of your ultrasonic bath.   Elma Lab Clean A20Sf Pipette Cleaning Solution Elma Lab Clean A20SF solution cleans pipettes and volumetric ware in ultrasonic cleaners and spray washers. Cleaned glass surfaces are free of surfactants and allow undisturbed draining of liquids. Pipettes cleaned with A20SF guarantee volumetric precision A20SF concentrate is diluted to 1% before use in ultrasonic cleaner Mildly alkaline, surfactant-free, Elma Lab Clean A20SF is used in ultrasonic cleaning baths and pipette rinsing units. The solution removes a broad range of contaminants including light grease, lime soap residues, fingerprints, and dust. Elma Lab Clean A20SF cleans volumetric glassware such as calibrated pipettes, burettes, and graduated cylinders, as well as volumetric instruments made of stainless steel, ceramics and plastic materials. Not for aluminum, magnesium and alloys of light-metals. The concentrated solution should be diluted with water to 1% for use in ultrasonic cleaners, 0.5% in spray washers, and > 2% for soaking. Safe and cost effective, Elma cleaning solutions prolong the lifetime of your ultrasonic bath.   Elma tec clean S1 Ultrasonic cleaning solution for corrosion removal Mildly acidic cleaning concentrate Removes oxide film, rust, lime, grease, oil, corrosion, and mineral deposits Rinses residue-free Safely removes oxidation and corrosion from electronic parts and printed circuit boards Brightens brass and copper alloys Elma tec clean S1 can be used in an ultrasonic cleaner to repair water-damaged electronics. It can safely be used to clean non-ferrous and light metals, stainless steels, glass, and plastics. The mildly acidic solution is also suitable for light passivation of stainless and chromium-containing steels. Biodegradable Elma tec clean S1 is highly concentrated and should be diluted to 1-5% with water before use for cleaning in an ultrasonic bath. A 10 liter bottle dilutes to 132 gallons of 2% solution. For passivation, the concentrate should be diluted to 10-20% with water. Safe and cost-effective Elma cleaning solutions prolong the lifetime of your ultrasonic bath.