EMS #259 Peek Tweezer, A = 5 (0.6mm); C

The handles are made from Antimagnetic Steel and Tips from Synthetic Fiber. Temperature Resistance: 375°F (190°C). Synthetic Fiber: High-performance Plastic type CP - PEEK/CF30 (Polyetheretherketone reinforced with 30 wt% carbon fiber) Very hard, high tensile and flexural strength. High heat- 260 – 300ºC – resistance to thermal aging. Excellent chemical resistance. ESD safe – low surface resistivity (102 Ohm). Engineering Plastic type CF - PA66/CF30 (Polyamide 66 reinforced with 30 wt% carbon fiber) Heat stable(-40ºC to 190ºC). Rigidity, excellent tensile strength and flexural strength. Good chemical resistance (oils, greases, fuels, non-polar solvents); not resistant to strong acids, alkalis and hot water or steam. ESD safe, (avoids dust attraction, sparks, ignition sources). Good conductivity. Non Conductive Plastic RF – PET/GF30 (Polyethylene terephtalate reinforced with 30 wt% glass fiber) High tensile and flexural strength. Good chemical resistance and low moisture absorption. Electrically insulation. High temperature capability. White in color.