eXTReme FoilSeal, Large, Non-Sterile

eXTReme™ FoilSeal™ Sealing Foils  for PCR, long-term compound storage, light sensitive assays and robotics eXTReme FoilSeal is an aluminum foil seal that o?ers excellent chemical resistance and superior performance in ultra-low temperatures. Certified DNase- & RNase- free Excellent chemical resistance (e.g. DMSO) Specially formulated adhesive provides an extremely strong bond which minimizes evaporation and prevents well-to-well contamination 1.9mil thick aluminum foil minimizes shredding during removal and is ideal for long-term cold storage Available in two sizes: Standard cut is recommended for all plate types Standard cut features chamfered corners; foil does not overhang plate for robotics applications and tight storage conditions Large cut is recommended for deep well plates Large cut is designed for greater coverage; results in a more complete seal around the edges of the plate which can reduce evaporation Large cut allows for easier positioning of the foil to the plate via edge of plate alignment vs. centering A single end-tab makes application and plate alignment easier because the natural curl of the foil is minimized; partially remove the liner at the single end-tab, apply a section to the plate, then peel back the remainder of the liner while applying the foil Conformable foil allows visual verification of seal security Pierceable with pipet tips and robotic probes for direct sample retrieval Removes cleanly from plate surfaces with no adhesive stringing or residue Functional Temperature: -80°C to +120°C Usable Dimensions: Standard Cut: 78.3mm x 118.1mm Large Cut: 81.5mm x 124.5mm eXTReme™ Seal Films  for PCR and Storage eXTReme Seal features an extra-strong thick adhesive to minimize evaporation yet removes easily without leaving residue on the   plate. Certified DNase- & RNase- free Available in two sizes: Standard cut is compatible with all plate types; when using raised-rim plates, the standard cut must be used so the film does not extend up the side walls of the plate and cause excessive evaporation Standard cut features chamfered corners: film does not overhang plate for robotics applications and tight storage conditions Large cut is designed for greater coverage; results in a more complete seal around the edges of the plate which can reduce evaporation rates Large cut allows for easier positioning of the film to the plate via edge of plate alignment vs. centering 2mil clear polyester film will not tear upon removal An extra strong, thick adhesive minimizes evaporation and well-to-well contamination Removes easily and cleanly from plate surfaces Features two removable end-tabs with perforations for ease of handling, application and removal Functional Temperature: -20°C to +120°C Usable Dimensions: Standard Cut: 78.3mm x 118.1mm Large Cut: 81.5mm x 121.9mm FoilSeal™ RollMate™ An economical, efficient way to rapidly seal microplates; faster than applying single sheeted foils. Application: Ideal for standard PCR, short-term storage, light sensitive assays and robotics Temperature Range: -20°C to +120°C Self-standing, non-slip supports hold pre-scored foil roll securely in place for quick and easy dispensing Removal from a continuous backing liner minimizes curl making FoilSeal easier to handle and apply Liner can be torn off or fed directly into a waste basket for disposal Roll tension can be easily adjusted to user preference (e.g. loose, tight) Certified DNase- & RNase- free 2.0mil aluminum foil minimizes shredding during removal; ideal for cold storage Conformable foil allows visual verification of seal security around each well Pierceable with a pipet tip or robotic probe for direct sample recovery Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage Removes easily and cleanly from plate surface High integrity packaging prevents damage during transit; poly bag eliminates dust and particulate contamination Excel Scientific Sealing Film Selection Chart