Flexible conductive silver paste for screen printing (C15-1311-954)

General description

This product is a thermoplastic screen printing ink, developed for use in membrane touch switch applications as well as counter electrode in electrochemical sensors and conductive tracks. It may be screen printed on to flexible polymeric substrates, such as polyimide, PEN and PET substrates, to create a highly conductive track for general circuitry.

The ink has undergone electrical and mechanical testing which has shown that it is very flexible.

Features and Benefits

Product Benefits

Low silver content paste presenting low resistivity, good flexibility and good adhesion on the mentioned substrates

Physical properties

PHYSICAL PROPERTIES PRINTED ON POLYESTER FILM (125μm PET film)

Sheet resistivity: 15-20mΩ/square at 25μm
30-45mΩ/square at 10μm
Bending test: ink survived 3 cycles
(Substrate is creased and bent internally and externally with a 2kg weight.
The test piece has failed when the resistance reaches 10 times the initial value.)
Double curing: aging factor of -0.7%after double curing at 150°C for 15min
How water test: aging factor of -0.2% after boiling for 1hour

Preparation Note

PROCESSING

Please mix well the paste without introducing air bubbles prior to screen printing.
Screen Printing Equipment: semi-automatic, manual
Ink Screen Life: >3 hours
Screen Types: suitable for use with polyester or stainless steel meshes in the range of 156 to 325 tpi.
Typical Drying Conditions: Dry at 130°C - 150°C for 10-30 minutes or on a belt dryer with air flow that sees 130°C-170°C for 5-10 minutes.
Clean Up Solvent: ethoxy propanol or sericol
Substrate: polyimide, PET, PEN and can also be printed on more rigid substrates such as alumina

Legal Information

Product of Gwent Electronic Materials Ltd (GEM), part of Sun Chemical Corporation

description: Coverage: 250-270 cm² per g (using a 230 mesh stainless steel screen), Flash point: 90°C, Solid content: 44-46% (at 130°C), Volume resistivity: 925 ohm cm at 60°C
527 ohm cm at 130°C. form: paste. hardness: 5B (pencil hardness). viscosity: 0.72-1.78 . Pa.s (Haake RS1 C20/2° TiL at 230 sec^-1 at 25°C). Pictograms: GHS09. Signal Word: Warning. Hazard Statements: H410. Precautionary Statements: P273 - P391 - P501. Hazard Classifications: Aquatic Acute 1 - Aquatic Chronic 1. Storage Class Code: 10 - Combustible liquids. WGK: WGK 3. Flash Point(F): 194.0 °F. Flash Point(C): 90 °C.