Fully Automatic Chemistry Analyzer (C08-0484-631)

Labomed introduces an automatic chemistry analyzer with varying testing capacities. 200 tests/hour. System Functions Type: Fully Automated, Random Access Biochemistry Analyze Throughput: 200 tests, up to 280 tests/hr with ISE (optional) Test Mode:  End point, Kinetics, Fixed Time, lmmunoturbidimetry, Monochromatic, Bi-chromatic and Multi-Standard Analysis, Linearity and Nonlinearity Calibration, Single and Dual Reagents  can be used Test Setting: Programmable for single-parameter, multi-parameter, combined parameter, batch test Parameter Setting: Completely open for editing test parameters and calculation parameters Sample System Sample Tray: 44 sample positions for primary tubes, test tubes and various sample cups, Whole sample tray is removable and replaceable. Any position can be aligned as the emergency test position. Sample Volume: 3 µL – 30 µL, programmed by 0.1 µL step Sample Handling: Dilute and retest automatically when the sample's concentration is beyond limitation Sample Probe: Liquid level detection and collision protection Probe cleaning: Automatic washing for both inside and outside, carry over <0.1% Syringe: High performance syringe, durable and maintenance free Optional item: Bar code reader Reagent System Reagent Tray: 44 positions for Single and Dual reagents, reagent positions can be aligned freely Refrigeration: Refrigerated reagent compartment, 24 hours non-stop cooling with Peltier element to maintain temperature 4-15°C Reagent Bottle Volume: 35ml and 20ml, Slope bottom design Reagent volume: 150 µL - 300 µL, prograrnmed by 0.1µ1 step Reagent Probe: Automatically detecting the liquid level; collision protection Reagent pre-heating function, inventory checking Real time monitoring of reagent residual volume and auto alarm Probe Cleaning: Washing for both inside and outside, carry over <0.1% Reaction System Reaction Tray: 44 reaction cuvettes with 6mm optical path, good UV penetrability, low consumable, low cost Reaction Technology: Back – Dividing – Light – Technology Reaction Volume: 250 µL - 300 µL Temperature: 37°, with +0.1° fluctuation Mixing System: Independent mixer Cleaning: Supports automatic cleaning of cuvettes and allows for complete drainage to reduce carry over Water consumption: 5L/hour Liquid Detection: Detergent, distilled water, waste liquid automatic detection and alarm Optical System Light Source: Halogen lamp 6V/ 10W, life span >3000 hours Wavelength: 340nm, 405nm, 450nm, 492nm, 505ml, 546nm, 578nm, 620nm, 670nm, 700nm Wavelength Accuracy: +2nm Detector: Photoelectron Diode Array Absorbance Range: 0.000 Abs -3.000 Abs Calibration and Quality Control Calibration Mode: Linear (one-point, two-point and multi-point ), Logit-Log4P, Logit-Log5P, Spline, Exponential, Polynomial, Parabola QC Rules: Westgard Multi-rule QC Mode: Intra-day and inter-day QC Operating System Computer: Windows 2000 System or above Data Management: Large capacity for results and reaction curves to be displayed, saved and printed Report: Edit and print complete reports, format editable, supports network printing Port: RS-232 Filters: FACA200 will have 10 filters 340,405,450,492,505,546,578,620,670,700nm Working Conditions Power: 220V ±22V, 50/60Hz ± 1Hz Power Consumption: <400VA Environmental Temperature: 15-30°C Humidity: <85% Dimension: 760 (L)  x 560 (W) X 530 (H) mm Weight: >85 Kgs