High-Temperature Furnace with Fiber Insulation, Model HT 16/17/P470, TMax 1750 C, 480V

Due to their solid construction and compact stand-alone design, these high-temperature furnaces are perfect for processes in the laboratory where the highest precision is needed. Oustanding temperature uniformity and practical details set unbeatable quality benchmarks. For configuration for your processes, these furnaces can be extended with extras from our extensive option list. Tmax 1600°C, 1750°C, or 1800°C Recommended working temperature 1750°C (for models HT ../18), increased wear and tear must be expected in case of working at higher temperatures Dual shell housing with fan cooling for low shell temperatures Heating from both sides via molybdenum disilicide heating elements High-quality fiber insulation backed by special insulation Side insulation constructed with tongue and groove blocks provides for low heat loss to the outside Long-life roof insulation with special suspension Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 Chain-guided parallel swivel door for defined opening and closing of the door Two-door design (front/back) for high-temperature furnaces > HT 276/.. Labyrinth sealing ensures the least possible temperature loss in the door area Reinforced floor as protection for bottom insulation as standard from models HT 16/16 upwards Vapor vent in the furnace roof Heating elements switched via thyristors Defined application within the constraints of the operating instructions NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive