Kit: Progard(R) 3 + Millipak(R)

General description

This water purification kit contains Millipak^® 100 Bacteria Filter (MPGL10ZW1) and Progard^® 3 Pretreatment Pack (PR0G00003).

• Millipak^® filter removes bacteria from pure water before it enters the analyzer.
• The Progard^® Pack pretreats water by removing large particles, organic compounds and free chlorine from tap water.

Application

• The filter provides bacteria- and particulate-free water suitable for laboratory use, including clinical analyzers.
• The pretreatment pack protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation.

Features and Benefits

Millipak^® 100 filter features:

• 0.22 μm Durapore^® filter membrane for bacteria removal.
• Low protein binding membrane yields high sample recovery with minimal loss of valuable product ensuring high-value filtration.

• Polyphosphate for anti-scaling protection.
• Silver-impregnated activated carbon filter for free chlorine reduction and bacteriostatic protection.
• Depth-filtration (0.5 μm) for removal of particles and colloids.

Other Notes

Directions for Use

• Organism Retention: Microorganisms
• Mode of Action: Filtering
• Application: General laboratory analysis
• Intended Use: Water purification
• Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes. Refer to the system equipment user guide section "Using the System" (available on USB key in the system box).
• Storage Statement: Store in a dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

AFS is a registered trademark of Merck KGaA, Darmstadt, Germany

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany