Chloride titrants

CHLORIDE STANDARD FOR 1000 MG CL-, (HCL IN H2O) TITRISOL

This kit tests for Chloride in fresh water samples using the Direct Reading Titrator method. Applications: Environmental Education, Aquarium and Fish Farming

Chlorides are tested to control the blow down from boiler and cooling systems in industrial water treatment. The sample is titrated with a standard solution of silver nitrate with chromate used as the indicator.

Chlorides are tested to control the blow down from boiler and cooling systems in industrial water treatment. The sample is titrated with a standard solution of silver nitrate with chromate used as the indicator.

Chloride is the most common inorganic anion found in water and wastewater. The Maximum Secondary Contaminant Level for drinking water for chloride is 250 mg/L.

Chloride is the most common inorganic anion found in water and wastewater. The Maximum Secondary Contaminant Level for drinking water for chloride is 250 mg/L.

Chloride is the most common inorganic anion found in water and wastewater. The Maximum Secondary Contaminant Level for drinking water for chloride is 250 mg/L.

Chloride is the most common inorganic anion found in water and wastewater. The Maximum Secondary Contaminant Level for drinking water for chloride is 250 mg/L.

Direct Reading Titrator (9859K40 and K41) For determining high range chlorine in water Range of 0 to 200 ppm Cl₂ in 4 ppm increments Sufficient for 50 tests at 200 ppm. Uses Iodometric reagent method.

Volumetric Karl Fischer compact titrators have been designed for a wide range of water content applications - determinations from a 100 ppm to 100% water, quickly and precisely Compact coulometric titrators are ideal for water contents in the range

CYLINDER 100ML AMBER CL B TD

CYLINDER 100ML CL A TC CAL