Lab Tubing

10 mm Tube Rack (Gray)

Thomas No. 1204B80 Recommended for 0.

10 position standards rack, 31mm, for 30 mm PFA vessels (N8145132, N8145133, and N8145134) or 31 mm digestion tubes

10x1000'x.002 Tubing, CE-Force Nylon 6 Clear, Level 50 Cle

Chromatographic column with integral reservoir and #15 Ace-Thred at top, and 2mm bore 1:5 taper PTFE plug at bottom. Column supplied with 7506-06 Nylon bushing and FETFE O-Ring.

Chromatographic column with integral reservoir and #15 Ace-Thred at top, and 2mm bore 1:5 taper PTFE plug at bottom. Column supplied with 7506-06 Nylon bushing and FETFE O-Ring.

A special well fabricated from glass that is worked to a very thin wall for better heat transfer. Fabricated in two sizes for either 25mm or 76mm immersion, length of tube being measured from the bottom of the ground joint.

A special well fabricated from glass that is worked to a very thin wall for better heat transfer. Fabricated in two sizes for either 25mm or 76mm immersion, length of tube being measured from the bottom of the ground joint.

Tubing is same diameter as reinforcing rings on the standard taper joint. The rings permit penetration by the clamp cushioning material, and permit firm support without the need for excessive pressure on the joint also, strain on the joint is

100 μL~1000 μL, Single Channel,Fully Autoclavable Mechanical Pipette, 1/pk - (1/PK)

100 mL Round Bottom Open-Top Tube Adapters (set of 4) - Benchtop Centrifuges, MISTT

Versatile storage from freezer to bench Stores tubes up to 2.0mL Suitable for temperatures as low as -90&degC Rugged polypropylene High-contrast alphanumeric indexing