Thermometer Accessories

Made of PTFE with Nylon knurled nut to adapt standard chemical thermometers. For use in 10/18 or 10/30 joints. Simple to use: insert thermometer to desired depth, tighten nut.

Thermometer adapter with inner joint at bottom and top threaded piece offset and angled approximately 10 degree for use in multiple neck flasks. Threaded Nylon bushing tightens into glass piece to form an O-Ring compression seal with thermometers,

Used in various Mini-Lab assemblies to hold standard chemical thermometer.

With a serrated hose connection for vacuum or for the introduction of gases. The #7 Chem-Thread at the top is for a vacuum tight seal of plain stem thermometers or any other tube having an O.

With a serrated hose connection for vacuum or for the introduction of gases. The #7 Chem-Thread at the top is for a vacuum tight seal of plain stem thermometers or any other tube having an O.

Jumbo display. Range 89.

TempO2 I Liquid Column Thermometer, with U/Adapt-It Connector (004084), (1) Arm 22mm OD, (1) Arm 22mm ID, 50/cs (Continental US Only)

CFM/CMM Thermo- Anemometer with built-in non-contact IR Thermometer measures remote surface temperatures to 500°F (260°C) with an 8:1 distance-to-spot ratio and Laser Pointer Simultaneous display of Ambient Temperature and Air Flow or Air Velocity

CALIBRATED,Therm,DURAC Plus,-1/201C,Blue

The deluxe Charles' Law Apparatus is used to study the degree of expansion that is directly proportional to the increase in temperature. This Charles' Law Apparatus enables students to precisely determine the volume coefficient of expansion of air

Control Bulb. Stainless steel, with IC thermocouple. Used with a thermocouple pyrometer to verify compliance of furnace with ASTM performance requirements. Accessory to be used with Ramsbottom Carbon Residue Apparatus.

DGTL THERMOMETR FPR 104620 RPO - Lab Equipment Essentials, Misc Lab Products