Ampules & Cuvettes & Tubes & Vials

TEST Turbidity (on Hanna 88703 EPA) 800 NTU Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material

TEST Turbidity 800 NTU +/- 8 Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material

TEST Turbidity 800 NTU +/- 8 Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material

TEST Turbidity 900 NTU Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material

TEST Turbidity 900 NTU Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material

TEST Turbidity 900 NTU Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material

pH: normal Immunoelectrophoresis: normal Hemoglobin: normal IgG Concentration: normal

Drying cycle removes residual moisture after sterilization continuous pressure purge eliminates air pockets and ensures thorough, even sterilization 60 minute cycle timer and temperature selection from 100&degC to 134&degC (212&degF to 273&degF)

Maximum breakage protection for known non-hazardous blood, serum, tissue, and other specimens Accommodates VacuTainer®, Microtainer®, and other collection/transport tubes* Available in multi-tube, slide, and tube/slide combinations Lightweight polyst

WHEATON&reg MicroLiter Shallow & Medium Polypropylene &muLplates&trade have a variety of closures that will stabilize the sample during the analytical sample run and, if necessary, reseal after the sample has been injected. A comprehensive line

WHEATON&reg MicroLiter Shallow & Medium Polypropylene &muLplates&trade have a variety of closures that will stabilize the sample during the analytical sample run and, if necessary, reseal after the sample has been injected. A comprehensive line

Reduce contamination risk HydroLogix Tips (HLT) are designed to reduce sample retention. Molded from virgin polypropylene, they don?t use additives or coatings that may affect sample integrity.