Equipment

Air-Tite Brand syringes are of the highest quality, yet are economical. Manufactured in China to our exacting specifications.

Ideal for viscous and high particulate solutions Wide, open end is ideal for slurries and gels All serological pipets are manufactured to the ASTM Standard Specification for Serological Pipets E-934 Bi-directional (positive and negative) graduations

Lightweight fixed volume pipettes for accurate and precise sampling and dispensing of liquids. Universal Tipcone &ndash compatible with internationally accepted tips.

The grinding vessel, a round bottom tube with 2 mm wall, has grinding chamber made of precision bore tubing and top reservoir with pouring spout, to accommodate displaced fluid. Unground walls are completely transparent.

The Dounce type, glass tissue grinder is supplied with two glass pestles one with a tight inner tolernace and one with a loose inner tolernace. The loose pestle can be used for initial reduction of the tissue sample and the tight pestle can be used

Produces a relatively coarse homogenate For cellular work where the nucleus remains intact after homogenization All glass construction * Stated clearances for the tubes and pestles are &ldquototal&rdquo not &ldquoannular&rdquo.

Fills and pours automatically, rapidly. One head for all capacities, all volumes.

1MM SIEVE

1mm Splitless Mode Quartz liner for Programmed-Temperature Split/Splitless Inlet System

A superior, low melting, silicone base lubricant which liquefies at body temperature. Because of its composition, you need apply only a very thin film of Stir-Lube&reg to a stirring shaft to increase bearing and shaft life at least three times over

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment.  Bell-ennium stirrers offer the laboratory researcher a wide range of

An extremely stable, medium viscosity, silicone oil. Available in two temperature ranges: Low Temp. maximum 180 degree C or High Temp. maximum 230 degree C. Neither oil shows discoloration after 40 hours at maximum temperature.