Equipment

Jumbo Soxhlet extraction apparatus equipped with a Duran flange at the top of the extractor. Flange is formed with a groove in the flat portion of the mating surface to accept a PTFE covered silicone o-ring to permit grease free assembly.

Jumbo Soxhlet extraction apparatus equipped with a Duran flange at the top of the extractor. Flange is formed with a groove in the flat portion of the mating surface to accept a PTFE covered silicone o-ring to permit grease free assembly.

PVDF adapter fits pipette nozzle to accommodate standard glass Pasteur pipettes. FPM O-rings care for effective tightness.

Accessories for Sterisart Pump Systems.

The Labnet 0.4 mL individual tube adapter is made of durable materials and meet all your laboratory requirements.

Tapered Titanium Micro Tips (9655V15, V20, V25) For use with 9655S15 or S20 Disruptor Horn for processing small volumes Produce amplitudes 3.5 times greater than that of standard horn Double Step Titanium Micro Tip (9655V30, V35, V40) Two-piece unit

Bent angle of 105°, with Standard Taper joints on inlet and outlet ends and inner drip-tip which bypasses vacuum take-off tubulation Has drip-tip at exit end Side-arm accepts 5/16&#8221 i.d.

Beaded pipe to sanitary fitting adapter connects to the 1-1/2&rdquo beaded pipe side arm of CG-1968-GL zero dead space drain valve. Approximate overall length of adapter is 1.75&rdquo.&nbsp NOTE: Requires a CG-1968 beaded pipe coupling.

Flow adapters Flow adapters can significantly improve FLEX-COLUMN&reg performance by protecting the gel bed from disruption during sample loading and by eliminating any dead volume above the gel bed.&nbsp Ideal for concentration and pH gradients,

Flow adapters Flow adapters can significantly improve FLEX-COLUMN&reg performance by protecting the gel bed from disruption during sample loading and by eliminating any dead volume above the gel bed.&nbsp Ideal for concentration and pH gradients,

With outer Standard Taper joint at the top and an inner-sealed through drip-tip joint at the bottom Bent at 105&deg angle The serrated sidearm is 10 mm O.D. drip-tip at the bottom extends about 20 mm below the lower end of the joint

Replacement receiving flask adapters for Buchi rotary evaporators. Joins steam tube to receiving flask. Combi-clip not included.