Equipment

Our 300mm West Condenser is made from high-quality borosilicate glass and has a sealed inner tube, two inlet/outlet arms, and 24/40 ground glass joints. Our Hemple Condenser is made from high-quality borosilicate glass and has a 300mm long

Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or CG-1372 glass thimbles.

Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or CG-1372 glass thimbles.

Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or CG-1372 glass thimbles.

Micro size Soxhlet extractor for use with 10 x 50mm paper or glass thimbles. Extractor body has a 19/22 top inner joint and a 14/20 lower inner joint.

Jumbo Soxhlet extraction apparatus equipped with a Duran flange at the top of the extractor. Flange is formed with a groove in the flat portion of the mating surface to accept a PTFE covered silicone o-ring to permit grease free assembly.

Friedrich Condenser with hose connection sidearm. 45/50 bottom standard taper joint Ring-sealed inner condensing tube with inner drip joint and side outlet for drying tube Molded 190 mm inner cold finger Used primarily in reflux mode and Soxhlet

Standard Taper outer joint at the top Standard Taper inner drip joint at the bottom Hose connections accept 3/8&rdquo ID flexible tubing Ref: ASTM Method D322 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type

Standard Taper outer joint at the top Standard Taper inner drip joint at the bottom Hose connections accept 3/8&rdquo ID flexible tubing Ref: ASTM Method D322 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type

Standard Taper outer joint at the top Standard Taper inner drip joint at the bottom Hose connections accept 3/8&rdquo ID flexible tubing Ref: ASTM Method D322 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type

Microscale sublimation adapter with vertically adjustable condenser tube that allows use with 3 mL, 5 mL, and 10 mL microscale vessels. Two-piece adapter features a #7 Ace-Thred at top of vacuum adapter that, with Nylon bushing and O-Ring, forms a

Air Cooled Remote Condensers Operate in wide outdoor temperature range from -20&ordmF to 120&ordmF. Single or double circuit for single or double unit installations.