ICP-MS

The baffled, cyclonic Twister spray chamber has a central transfer tube, which acts as a secondary particle separator, helping separate larger aerosol particles from the sample. This reduces solvent load in the plasma without compromising detection

The spray chamber is an integral part of the sample introduction system responsible for filtering the sample mist to permit the appropriate droplet size distribution to reach the plasma. The cyclonic spray chamber relies on momentum to efficiently

This nebulizer adapter plug 16/6 is used with standard glass cyclonic spray chambers (N0776052) in Optima 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV, and 8x00 ICP-OES series instruments.

The baffled, cyclonic Twister spray chamber has a central transfer tube, which acts as a secondary particle separator, helping separate larger aerosol particles from the sample. This reduces solvent load in the plasma without compromising detection

Secures nebulizer to spray chamber.

The 32 cm PTFE drain line has a 1/4-28 spray chamber fitting. 160 cm of additional 0.8 mm I.D. drain line tubing is included.

The drain line kit includes a 1/4-28 spray chamber fitting with attached 32 cm line, as well as additional 0.75 mm I.D. Santoprene MPP tubing (double grey marked).

This torch adapter, with an auxiliary port for oxygen addition, is used with Optima 4300 V, 5300 V, and 7300 V ICP-OES series instruments.

Used to align the torch in the load coil.

This torch glassware knurled nit is used with Optima 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV, and 8x00 ICP-OES series instruments.

Two Torch Injector Nuts are included in the NexION 2000 ICP-MS Base Configuration's Consumable Kit (N8150054), Core Configuration's Consumable Kit (N8150055), Productivity Configuration's Consumable Kit (N8150056), and Semi Configuration's

This torch module mounting block is a sample introduction component used with Optima ™ 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV and 8x00 ICP-OES series instruments.