Water Purification Distillation

With outer Standard Taper joint at the top and an inner-sealed through drip-tip joint at the bottom Bent at 105&deg angle The serrated sidearm is 10 mm O.D. drip-tip at the bottom extends about 20 mm below the lower end of the joint

With outer Standard Taper joint at the top and an inner-sealed through drip-tip joint at the bottom Bent at 105&deg angle The serrated sidearm is 10 mm O.D. drip-tip at the bottom extends about 20 mm below the lower end of the joint

Provides dual entry into a variety of flasks BEVEL-SEAL adapters allow temperature measurements at either top outer opening. Useful for reflux with addition- type reactions.

Provides dual entry into a variety of flasks BEVEL-SEAL adapters allow temperature measurements at either top outer opening. Useful for reflux with addition- type reactions.

AY0017-1 This kit accommodates varying inlet water contaminants. When used, the kit reduces the frequency of cleaning LabStrong Fi-Streem Water Stills and other distillation systems.

Accessories for Vivapore 5 and 10/20 static concentrators. Accessories for Vivapure Ion Exchange Columns and Viivapure Purification Kits.

Angled hose connector for LabStrong™ Fi-Streem™ II and III stills. Parts are typically available to ship immediately to limit down time in the lab.

Fully automatic operation High purity pyrogen free output Low temperature distillate Operates from any raw water supply Reservoir level control Simple conversion to pre-treated feed Supplied with wall mounting bracket Safety features allow

Fully automatic operation High purity pyrogen free output Low temperature distillate Operates from any raw water supply Reservoir level control Simple conversion to pre-treated feed Supplied with wall mounting bracket Safety features allow

Fully automatic operation High purity pyrogen free output Low temperature distillate Operates from any raw water supply Reservoir level control Simple conversion to pre-treated feed Supplied with wall mounting bracket Safety features allow

The arium&reg comfort I is a combined system for producing ASTM Type 1 ultrapure water and Type 3 pure water. This system features the latest reverse osmosis technology and a unique filter cartridge to deliver water of the highest reproducible

The arium&reg conversion kit enables you to easily install an arium&reg comfort or an arium&reg pro bench-top system as a built-in unit. Its extended tubing as well as its display and dispensing unit let you optimally integrate this equipment