-
9375-08For operation other than at atmospheric pressure. Vacuum is applied to the side arm with the T-bore stopcock. The secondary receiver is vented by means of the lower stopcock. The capacity from the bottom of the drip to the stopcock is 2.5mL.
-
9389-02With upper joint at 105 degree angle. For operation other than at atmospheric pressure.
-
9357-02Newman stopcock facilitates reflux ratio adjustment and reduces hold-up on walls product drops directly into receiver. Stopcocks are arranged for convenient manipulation and are placed so that the head may be used in either right or left-hand setup.
-
9362-08Automatic, reflux control via solenoid valve arrangement. Reflux control is effected by an adjustable time switch and solenoid takeoff valve.
-
7613-03Standard taper inner ground glass joint with drip tip and ring on shank for use with 7612 outer member, O-Ring and cap to form a leak-tight seal. For cap, see 7616 for O-Ring, see 7617.
-
9420-02Bent gooseneck type drying tube. Code -02 uses #00 rubber stopper, code -04, uses #3.
-
9419-03Drying tube with standard taper joint, supplied with rubber stopper.
-
9357-01Newman stopcock facilitates reflux ratio adjustment and reduces hold-up on walls product drops directly into receiver. Stopcocks are arranged for convenient manipulation and are placed so that the head may be used in either right or left-hand setup.
-
9543-04Ground glass stopper for 7/10 or 14/20 joint, for use with microscale equipment.
-
8277-14Hy-n-Dry stopper makes any vessel a desiccator, inexpensively. Allows sample storage for long periods, free from atmospheric moisture, even during overnight temperature changes or when refrigerating.
-
7585-26Medium length joints available in a variety of sizes both inner and outer members.
-
7635-05Standard taper inner joint with extending tube reduced in diameter.