Supplies

With 14/20 or 19/22 joints, outer joint at top and inner at bottom. Size B hose connection is on side.

Standard taper adapter with 8-425 gpi threaded top and a 2mm bore stopcock with a ptfe plug. Syringe port is supplied with a cap and septum.

Apparatus designed by James Velasco of U.S.

Standard taper inner ground glass joint with drip tip and ring on shank for use with 7612 outer member, O-Ring and cap to form a leak-tight seal. For cap, see 7616 for O-Ring, see 7617.

Bent gooseneck type drying tube. Code -02 uses #00 rubber stopper, code -04, uses #3.

Medium length joints available in a variety of sizes both inner and outer members.

Medium length standard taper stoppers, size 7/15, 10/18 and 12/18 are solid, all others are hollow.

Standard taper inner member ground joint with groove for O-Ring. For use with outer members 7565, 7566, 7567, 7651, and 7652.

Tubing is same diameter as reinforcing rings on the standard taper joint. The rings permit penetration by the clamp cushioning material, and permit firm support without the need for excessive pressure on the joint also, strain on the joint is

Standard taper, outer member, medium length, straight-sided joint.

Medium length joints available in a variety of sizes both inner and outer members.

Designed for use with inner member regular joints with only a slight mismatch. Treated on inner surface so that it may be cemented to glass with ACE 7560 epoxy adhesive.