General Chromatography

The Internal Standards Probes offer high chemical resistance for applications involving strong acids, alkalis and organics. A contoured design reduces carryover, while an all-PFA-wetted sample flow path reduces contamination.

The ESI 500 uL sample loop with a 1/4-28 thread fitting provides a water-tight connection and can be used with high-flow valve. Application: For High-Flow valve

0.5mL Sample Loop, connect to ports #1 and #4

Connects to ports, #1and #4 SC-FAST high-flow PFA crimp free SC-FAST loops provide low resistance for fast loading and rinse out. Multipurpose PFA FAST loops for high-flow valves.

PFA crimp free SC-FAST loops provide low resistance for fast loading and rinse out. Multipurpose PFA FAST loops for high-flow valves. Recommended for use with 0.8 mm i.d. (blue) probe. 1.6 mm o.d., 1/4-28 fittings.

0.8mm ID Sample Loop, PTFE, 2mL, connects to ports, #1 and #4 SC-FAST high-flow (-28 fittings, 1.6mm OD x 0.8mm ID tubing)

1 Liter Solvent Bottle with 6mm connector

1 Liter Solvent Bottle with 8mm connector

Multipurpose PFA FAST loops for high-flow valves. Recommended for use with 1.0 mm i.d. (gray) probe. 1.6 mm o.d., 1/4-28 fittings.

These Optima 8x00 series quartz injectors are used for volatile organic solvent introduction and recommended for a wide range of non-HF applications. Please note: Compatible with ESI press-fit PFA spray chamber connection.

Flow adapters improve chromatogram resolution by delivering the sample and buffer directly to the top of the gel bed. This protects the gel bed from disruption during sample loading and eliminates any dead volume above the gel bed.

The injector is used for volatile organic solvent introduction and recommended for a wide range of non-HF applications. For use with Demountable Quartz Torch (N8152379).