General Chromatography

2000 psig pressure rating Temperature rating - 149&degC (brass), 204&degC (stainless) 1/8&ldquo and 1/4&ldquo tube fittings Metering valves gives very fine control of gas flow between 100 and 800 cc/min. Valve is not designed for shutoff service.

2000 psig pressure rating Temperature rating - 149&degC (brass), 204&degC (stainless) 1/8&ldquo and 1/4&ldquo tube fittings Metering valves gives very fine control of gas flow between 100 and 800 cc/min. Valve is not designed for shutoff service.

2000 psig pressure rating Temperature rating - 149&degC (brass), 204&degC (stainless) 1/8&ldquo and 1/4&ldquo tube fittings Metering valves gives very fine control of gas flow between 100 and 800 cc/min. Valve is not designed for shutoff service.

MID IR SOURCER ELEMENT

Instrument Performance Validation Kits are available for both Mid-IR and Near-IR FT-IR instruments. All the kits include a polystyrene Traceable Reference Material (TRM) for abscissa calibration valid for three years.

Modular building block-type mixing manifold with one mixing channel and three connections, two inlet and one outlet. Made from chemically-resistant plastic.

Complete modular unit, consisting of: two mixing manifolds with tubing adapters K and M. A gas-liquid separator with a PTFE membrane 5 spare PTFE membranes 1 PTFE tube 110mm long, and 1 PTFE tube 300mm long.

The contacts are modified in the injection port area which helps to minimize condensation and improve analytical performance with difficult matrices (e.g.

The contacts are modified in the injection port area which helps to minimize condensation and improve analytical performance with difficult matrices (e.g.

Each certificate also includes NIST documentation and information regarding the methods used. Designed to contain virtually every element in the mass spectrum for concentration checks.

Designed to contain virtually every element in the mass spectrum for concentration checks. Multi-element Calibration Standard 2, Matrix per Volume: 5% HNO₃ per 100 mL, Concentration of Element: 10 µg/mL Cerium, 10 µg/mL Dysprosium, 10

Pure Grade Standards for AA and ICP-OES: Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certi cate Impurities reported at ppm level All Standards are prepared and c