Glass

Process pipe reducer elbow.

Process pipe reducer elbow.

Process pipe 90 degree mitered elbow.

Cylindrical vessel with a 2mm bore PTFE stopcock at top, GPI threaded angled side port, & #15 Ace-Thred at bottom that accepts a PTFE adapter with removable Por. C glass filter disc & a PTFE shut-off valve.

Medium length joints available in a variety of sizes both inner and outer members.

Medium length joints available in a variety of sizes both inner and outer members.

Standard taper inner member ground joint for use with outer members listed under Catalog number 7565, 7566, 7567, 7651 and 7652. Can also be used with half joints listed under 7568 and 7585.

Tubing is same diameter as reinforcing rings on the standard taper joint. The rings permit penetration by the clamp cushioning material, and permit firm support without the need for excessive pressure on the joint also, strain on the joint is

O.D. of standard taper joint and tube are approximately same size, allowing for ease in clamping.

Jacketed filter reactor systems with all you need to perform single or multi-step reactions and filtrations in the same vessel. Systems with Ace-Thred heads are pressure rated to 35 psi at 100 degrees C.

Jacketed filter reactor systems with all you need to perform single or multi-step reactions and filtrations in the same vessel. Systems with Ace-Thred heads are pressure rated to 35 psi at 100 degrees C.

Jacketed filter reactor systems with all you need to perform single or multi-step reactions and filtrations in the same vessel. Systems with Ace-Thred heads are pressure rated to 35 psi at 100 degrees C.