Glass Joints

Recommended for use with PTFE-Clad ball member. Polished surface does not wear PTFE, assures more precise fit than the standard ground surface.

Used in place of lubricant for average laboratory use not intended for high vacuum use unless cemented to glass with ACE 7560 epoxy adhesive. Rugged approximately .38mm (.015) wall thickness."

Full length, standard wall. U.S. Reissue Patent No. 22181. These famous ACE spherical joints are precision ground and vacuum leak-tested for fit and interchangeability. Available in both ball and socket members.

Transition adapter to convert a spherical ball or socket 2 joint to a standard taper inner joint.

Fabricated from 18-8 type Stainless Steel No. 303 free machining.

Fabricated from 18-8 type Stainless Steel No. 303 free machining.

Length measured from top of joint to tip. Hose connection is size A.

Bushing connector for joining an Ace-Thred to a reduced end tube. Assorted bushing and o-ring materials.

Bushing connector for joining an Ace-Thred to a reduced end tube. Assorted bushing and o-ring materials.

Internally threaded connectors, available in glass or 18-8 type 303 free machining stainless steel. For use in place of ground glass joints on flasks, columns, etc.

All pipe is available from stock in lengths shown special lengths available at slightly higher cost.

All pipe is available from stock in lengths shown special lengths available at slightly higher cost.