Glass Joints

Complete filter reactor assembly allows single or multi-step reactions and filtrations in the same vessel. Features heavy wall glass, interchangeable filters, mechanical agitation and 4&quot or 6&quot Duran flanges.

Same rugged, heavy wall Reactor as 6384, except Instatherm coated for safer, rapid heating. Instatherm can be operated at 115v with ACE Proportional Temperature Controllers, such as 12125, or with a Powerstat.

Jacketed filter reactor systems with all you need to perform single or multi-step reactions and filtrations in the same vessel. Systems with Ace-Thred heads are pressure rated to 35 psi at 100 degrees C.

Jacketed filter reactor systems with all you need to perform single or multi-step reactions and filtrations in the same vessel. Systems with Ace-Thred heads are pressure rated to 35 psi at 100 degrees C.

Microscale Craig tube for recrystallizing small quantities of reaction product. Consists of a glass outer tube with non-uniform grind to purposely allow leakage, and a PTFE inner plug*.

84 cm of thin wall biological grade vinyl tubing connects an outer luer taper and an inner luer taper. Tubing is approx. 2 mm I.D. Connects to 5851 Stopcock, 5837 Bottom Drip Adapter. Six per package.

End tooled to accept rubber stopper septum. Used on Chromatographic Columns. Overall length 15cm, opening is 5mm. Rubber septum listed below. Socket also works well with 12898 Septum, see Division II.

Standard luer type joint as found on syringes. Inside diameter through ground tip approximately 1.2mm.

Standard luer type joint as found on syringes. Inside diameter through ground tip approximately 1.2mm.

Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm, and has an internal needle valve which permits for fine control of gases or liquids added to reactions.

Process pipe reducing tee.

Process pipe reducing tee.