-
9565-05Used for Microscale vacuum distillations, especially for use with 9595 Spinning Band Micro-distillation Column. With outer joint and external thread at one end for making an O-RING-CAP-SEAL type connection with mating male joints, inner joint at
-
9565-06Used for Microscale vacuum distillations, especially for use with 9595 Spinning Band Micro-distillation Column. With outer joint and external thread at one end for making an O-RING-CAP-SEAL type connection with mating male joints, inner joint at
-
9059-12With drawn capillary tip for the introduction of gases below the liquid surface. Outside diameter is 7 mm. Length approximately 320mm (12-1/2"). For use with #7 Ace-Thred. Hose connection on bent adapter is size A.
-
9059-08With drawn capillary tip for the introduction of gases below the liquid surface. Outside diameter is 7 mm. Length approximately 320mm (12-1/2"). For use with #7 Ace-Thred. Hose connection on bent adapter is size A.
-
CG-1275-20Adapter Distribution,14/20 for CG-1275
-
CG-1276-10Cow type design has three receivers 45° apart. Condensers with lower drip tip inner joints will protrude into the spherical section, permitting the distillate to fall directly into the receiving flasks.
-
CG-1279-11Radial style distillation receiver allows four flasks to be progressively filled. Upper vacuum adapter is bent at a 105º angle.
-
CG-1276-12Cow type design has three receivers 45° apart. Condensers with lower drip tip inner joints will protrude into the spherical section, permitting the distillate to fall directly into the receiving flasks.
-
CG-1279-03Radial style distillation receiver allows four flasks to be progressively filled. Upper vacuum adapter is bent at a 105º angle.
-
185030-2942Stopcock available with glass or PTFE plug For regulating the flow of gases or liquids into reaction systems. Adapter consists of male standard taper joint fittng with stopcock and a 90° angle male hose barb.
-
185000-2440Stopcock available with glass or PTFE plug For regulating the flow of gases or liquids into reaction systems. Adapter consists of male standard taper joint fittng with stopcock and a 90° angle male hose barb.
-
AF-0540-10Used in the filtration and recrystallization of highly sensitive materials. Filter tube has 14/20 standard taper inner joints at both ends along with a 14/20 outer joint for the connection to the 90º adapter.