Traps

With a 24/40 joint at the bottom. Inside diameter of coolant section is 50mm and length is approximately 250mm. O.D. of inlet and outlet is 22mm. Available modified with #15 Ace-Thred inlet/outlet for use with Ace-Safe tubing connectors.

With a 24/40 joint at the bottom. Inside diameter of coolant section is 50mm and length is approximately 250mm. O.D. of inlet and outlet is 22mm. Available modified with #15 Ace-Thred inlet/outlet for use with Ace-Safe tubing connectors.

Round bottom with adjustable inner tube and Nylon bushing with FETFE O-Ring. Optional threaded adapters (8746-75 and -78) will allow safe and easy tubing connect-disconnect.

Round bottom with adjustable inner tube and Nylon bushing with FETFE O-Ring. Optional threaded adapters (8746-75 and -78) will allow safe and easy tubing connect-disconnect.

Upper tubulation prevents migration of film and foam directly into the condenser.

Upper tubulation prevents migration of film and foam directly into the condenser.

With both arms in vertical position. 60mm O.D. x 250mm long. Side arms are 12mm O.D. Available with or without serrated connections on arms. Serrated connectors have six rings: the smallest, 14mm O.D. largest, 16mm O.D.

Distilling trap adapter with standard taper joints.

Round bottom with adjustable inner tube and Nylon bushing with FETFE O-Ring. Optional threaded adapters (8746-75 and -78) will allow safe and easy tubing connect-disconnect.

Round bottom with adjustable inner tube and Nylon bushing with FETFE O-Ring. Optional threaded adapters (8746-75 and -78) will allow safe and easy tubing connect-disconnect.

Round bottom with adjustable inner tube and Nylon bushing with FETFE O-Ring. Optional threaded adapters (8746-75 and -78) will allow safe and easy tubing connect-disconnect.

Distilling trap adapter with outer joint top and inner joint bottom