Leland Legacy 5-Pack Sample Pump Kit with Multi-Charger

High flows from 5 to 15 L/min Achieve flow rates that you couldn’t reach before when using a personal sample pump. The Leland Legacy provides the high flows and long run times of a vacuum-style pump in a compact, portable, and battery-operated sampler.  Long runs for 24 hours on one battery charge Rechargeable lithium-ion (Li-Ion) battery pack provides 24-hour run times with impactors and other sampling devices with low back pressures. * Leland Legacy is ideal for 24-hour indoor air studies and unattended ambient air sampling. * Leland Legacy is not recommended for high back pressure applications such as asbestosclearance sampling. Typical Run Time: 24+ hours, based on new pump with fully charged battery: Sioutas Impactor at 9 L/min (approximately 13 inches water back pressure) Personal Environmental Monitor (PEM) with 37-mm, 2.0-µm PTFE filter Cat. No. 225-1709‡ at 10 L/min Low-volume PUF Tube at 5 L/min IMPACT Sampler (PM2.5 or PM10) at 10 L/min For extended run times, the pump may be operated while attached to the approved charger? Low Levels Longer runs at higher flows provide more sample for the enhanced sensitivity required for measuring low concentrations, particularly in indoor air environments Low Noise With the noise-reducing case accessory, the Leland Legacy can operate at 10 L/min and 12 inches water back pressure with a noise level of only 52 dBA.** ** Measured 3 feet (1 meter) from pump operating at 10 L/min without media Advanced flow control  The patented (U.S. Patent Nos. 5,892,160) internal flow sensor measures flow directly and acts as a secondary standard to constantly maintain the set flow. Set flow is achieved immediately at start-up and flow calibration is automatically maintained by built-in sensors that compensate for differences in temperature and atmospheric pressure during sampling. Flexible programming Manual three-button operation - No tools needed. Simply use the Leland Legacy built-in keypad to set, calibrate, and sample! Real-time sampling parameters are available at the touch of a button. PC programmability - The ultimate in pump scheduling and record keeping. Use Leland Legacy with your PC and DataTrac for Leland Legacy Software to create complete running sequences, download sampling and calibration data, and generate sampling reports for ISO 9000, quality programs, and occupational health and safety management systems. DataTrac Software for Leland Legacy is included in the 5-pack kits and sold separately. Applications Use in non-explosive locations only. 24-hour exposure monitoring Indoor air studies Particulate sampling: Pesticides — EPA TO-10A and ASTM 4861 Bioaerosols (spore traps/cassettes) Cotton dust Radon decay products (ASTM D6327-98) Isokinetic sampling Nanoparticles with 37-mm MCE filter at 7 L/min Respirable dust with 8 L/min PPI sampler Environmental sampling Sampling with cascade impactors Spore trap sampling (VersaTrap)  PM2.5 with PEM at 10 L/min (EPA IP-10A)