Lid for Saggar

Select between different bottom plates and collecting pans for protection of the furnace and easy loading (for models L, LT, LE, LV and LVT). Heat-resistant gloves for protection of the operator when loading or removing hot materials, resistant to 650°C or 700°C. Various tongs for easy loading and unloading of the furnace. 1185H87 (631000140): Chimney for connection to an exhaust pipe. 1185H88 (631000812): Chimney with fan, to remove exhaust gas from the furnace better. The P 330 controller can be used to activate the fan automatically (not for model L(T)15..).* 1185H89 (631000166): Catalytic converter with fan for removal of organic components from the exhaust air. Organic components are catalytically oxidized at about 600°C, broken into carbon dioxide and water vapor. Irritating odors are thus largely eliminated. The P 330 controller can be used to switch the catalytic converter automatically (not for model L(T)15..).* * Note: If other controller types are used an adapter cable for connection to mains supply has to be ordered separately. The device will be activated by plugging in the socket. 1185H90 (699000279) & 1185H91 (699000985): Square saggar for furnaces HTC and LHT, Tmax 1600 °C The load is placed in ceramic saggars for optimal utilization of the furnace space. Up to three saggars can be stacked on top of each other in the furnace. Each saggar has cut-outs for better ventilation. The top saggar should be closed with a lid made of ceramics also.