Surgical suction drain probes

In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they

With straight, open top and a 2mm bore 1:5 taper PTFE stopcock plug. Porosity A frit, 145-174 micron.

With a 24/40 joint at the bottom. Inside diameter of coolant section is 50mm and length is approximately 250mm. O.D. of inlet and outlet is 22mm. Available modified with #15 Ace-Thred inlet/outlet for use with Ace-Safe tubing connectors.

With straight, open top and a 2mm bore 1:5 taper PTFE stopcock plug. Porosity A frit, 145-174 micron.

Precision grade, with 3-way oblique stopcock. Available with oblique bore hollow or solid plug. Plug has hole to permit evacuation of the lower chamber and prevents leakage through the bottom.

Precision grade, with 3-way oblique stopcock. Available with oblique bore hollow or solid plug. Plug has hole to permit evacuation of the lower chamber and prevents leakage through the bottom.

Closed Suction Catheter, 12 FR w/ Depth Markings, for use w/ Verso Adapter, 50/cs (Continental US Only)

15mm Swivel, 50/cs (US Only)

Suction Device, Kurtis MSD, 3.0 mm, 10/cs (Continental US Only)

ALFUZOSIN CYLINDR SINKR 316SS

Sterile and packaged in tyvek pouch., Rigid Suction Yankauer, Regular Tip, Non-Vented, 50/cs

Sterile and packaged in tyvek pouch., Rigid Suction Yankauer, Regular Tip, Vented, 50/cs