MVP ICON ATP Calibrator Set (C15-1307-214)

General description

MVP ICON^® ATP Calibrator Set consists of two calibration devices (“rods”) that are used for performance verification and calibration of the MVP ICON^® and MVP systems. The luminescent calibrator consists of a 14C radioactive source that emits a very low level (5 x 105 d.p.m., or 0.225 microcuries) of low-energy ß-radiation in a plastic scintillation matrix. This matrix is configured to give constant light output, within 10 % of its original value, at a sufficiently high level to make consistent verification and calibration functions possible over the five‐year life of the calibrator. The non‐luminescent black plastic calibrator provides a reliable low‐end or “dark” source reading.

Application

MVP ICON^® ATP Calibrator Set is used for performance verification and calibration of the MVP ICON^® instrument for rapid monitoring of surface hygiene in the Food and Beverage industries.

Features and Benefits

• On-site calibration
• Satisfies HACCP and GMP requirements
• No need to send the equipment out to a 3rd party.

Components

• One luminescent calibrator
• One non-luminescent calibrator

Suitability

ATP Testing, Food Processing, HACCP Monitoring, Sanitation

Principle

The luminescent calibrator consists of a 14^C radioactive source that emits a very low level (5 x 10⁵ d.p.m., or 0.225 microcuries) of low energy ß radiation in a plastic scintillation matrix. This matrix is configured to give constant light output, within 10% of its original value, at a sufficiently high level to make consistent verification and calibration functions possible over the five- year life of the calibrator. The non-luminescent black plastic calibrator provides a reliable low-end or “dark” source reading.

Testing Method

ATP Bioluminescence

Storage and Stability

To ensure the stability and longevity of the luminescent calibrator, the following precautions must be taken:

• Limit Exposure to Light.
• Store the luminescent calibrator in the dark or weak ambient light.
• If the luminescent calibrator is exposed to bright light before use, insert it in the MVP ICON^® or MVP and wait a minimum of 2 minutes before proceeding.
• The kit box provided is recommended as an appropriate dark storage.
• Do not expose to direct sunlight or intense artificial light before use.

Other Notes

Avoid crushing, cutting, or dropping the calibrators.

Legal Information

BioControl is a registered trademark of BioControl Systems, Inc.

MVP ICON is a registered trademark of BioControl Systems, Inc.

Agency: EP, ISO, USP. shelf life: 5 . yr. feature: ready-to-use. manufacturer/tradename: BioControl Systems, MVP ICON^®. . packaging: set of calibrator rods. storage condition: protect from light (Keep in a tightlyclosed container, away from any light sources). application(s): food and beverages. compatibility: for use with MVP ICON instrument. storage temp.: 15-25°C. Storage Class Code: 10 - Combustible liquids. WGK: WGK 3. Flash Point(F): Not applicable. Flash Point(C): Not applicable.