N-HEPTANE FOR LIQUID CHROMATOGRAPHY LICH (C15-1214-995)

General description

LiChrosolv^® solvents exhibit high degree of UV transmittance, low particle count, low acidity and alkalinity and low evaporation residue level. This makes them suitable for reproducible separations.

Application

Intended for U/HPLC and LC-MS/MS applications.
Also reported for use as a component of extraction mixture in screening drugs of abuse in urine samples by GC-MS.

Features and Benefits

• suitability tested and specified for UHPLC-MS and UHPLC-UV: for analytical flexibility
• specified quality in positive and negative electrospray ionization (ESI) and atmospheric-pressure chemical ionization-mass spectrometry (APCI-MS) for lowest detection limits and confidence in analyses in all important MS modes (test 1)

—ESI/APCI (+) < 2 ppb
—ESI/APCI (-) < 10 ppb

• lowest impurity profile: for interference-free baselines (test 2)
• microfiltered through 0.2 μm filter (test 3) to provide:

—a long lifespan to filters and mechanical parts of HPLC systems
—reduced risk of column clogging

• packaged in borosilicate glass bottles for minimized contamination with metal ions
• lowest levels of trace metal impurities to minimize metal ion adduct formation

—<5ppb

• lowest level of polyethylene glycol (PEG) impurities in UHPLC-MS solvent lineup (PEG S/N signal-to-noise-ratio < 50)

Preparation Note

Product filtered through a 0.2 μm filter

Analysis Note

Purity (GC): ≥ 99.3 %
Identity (IR): conforms
Evaporation residue: ≤ 2.0 mg/l
Water: ≤ 0.005 %
Acidity: ≤ 0.0002 meq/g
Alkalinity: ≤ 0.0002 meq/g
Transmission (at 210 nm): ≥ 50 %
Transmission (at 220 nm): ≥ 80 %
Transmission (from 245 nm): ≥ 98 %
Filtered by 0.2 µm filter

Legal Information

LICHROSOLV is a registered trademark of Merck KGaA, Darmstadt, Germany