POTASSIUM BROMIDE UVASOL 100 G

General description

Potassium bromide is transparent from the near UV to long wave IR wavelengths. In IR-spectroscopy, solid samples which are difficult to melt or dissolve in any suitable IR-transmitting solvent, are analyzed by grinding with Potassium bromide powder, and pressing into a disc. This procedure has a high quality demand of the used potassium bromide. Potassium bromide Uvasol is adjusted to a mean particle size of 150 μm. This is sufficient for the preparation of perfectly good pellets without the need for further pre-treatment and the associated risk of contamination. It also retains its powdery form over a period of years if stored in an air-tight condition. Its physical suitability for pelletising is checked by a special application test and its chemical purity established by full spectrum FT-IR analysis.

Linkage

Replaces: PX1378

Analysis Note

Application test: passes test
Absorbance(2g pressed disk, 0.5 cm layer thickness)(Water; 3775-3050/1760-1520 cm⁻¹): ≤ 0.15
Absorbance(2g pressed disk, 0.5 cm layer thickness)(CH-compounds; 3050-2750 cm⁻¹): ≤ 0.004
Absorbance(2g pressed disk, 0.5 cm layer thickness)(other ; 4000-400 cm⁻¹): ≤ 0.020
Particle Size (d10): ≤ 100 µm
Particle Size (d50): ≤ 200 µm
Particle Size (d90): ≤ 500 µm

Legal Information

UVASOL is a registered trademark of Merck KGaA, Darmstadt, Germany