Round-Ended Hardened Steel Vial Set

Steel Ball Set, 2 x 1/2 in & 4 x 1/4 in: Two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) steel balls for SPEX SamplePrep 8001 and 8009 Vial Sets. Polystyrene Vial w/Screw-On Cap: For wet or dry mixing of liquids and powders. Vial size 21/8 in. (5.4 cm) diameter x 21/2 in. (6.7 cm) long. Polystyrene body with plastic screw-on cap. Volume 135 mL; mixing load approximately 50 mL. For use with SPEX SamplePrep 3112 or 8006A methacrylate balls. Alumina Ceramic Vial Set: For wet (use 8015 Clamp) or dry grinding/ mixing. Vial size 21/4 in. (5.7 cm) diameter x 23/4 in. (7.0 cm) long. Set includes high purity 99.5% alumina ceramic vial body and two slip-on caps, one 1/2 in. (12.7 mm) alumina ceramic ball, and eight corprene gaskets. Volume 45 mL; grinding load 2–8 mL; mixing load approximately 20 mL. Alumina Ceramic Ball, 1/2 in. (12.7 mm): 1/2 in. (12.7 mm) diameter alumina ceramic ball for SPEX SamplePrep 8003 Vial Set. Tungsten Carbide Vial Set: For wet or dry grinding/mixing. Vial size 21/4 in. (5.7 cm) diameter x 21/2 in. (6.35 cm) long. Set includes tungsten carbide-lined body, two screw-on tungsten carbide-lined caps, two 7/16 in. (11.2 mm) tungsten carbide balls, and eight corprene gaskets. Volume 55 mL; grinding load 3–10 mL; mixing load approximately 25 mL. Tungsten Carbide Ball, 7/16 in.: 7/16 in. (11.2 mm) diameter tungsten carbide ball for SPEX SamplePrep 8004 and 8004Stainless Steel Vial Sets. Steel-Jacketed Tungsten Carbide Vial Set: For wet or dry grinding/mixing in extreme environments. Vial size 21/4 in. (5.7 cm) diameter x 21/2 in. (6.35 cm) long. The screw-on caps and body are 304 stainless steel, lined with tungsten carbide. Gaskets (part no. 39322) are Viton for enhanced resistance to heat and chemicals. Set includes two 7/16 in. (11.2 mm) tungsten carbide balls and six extra Viton gaskets (39322). Voume 55 mL; grinding load 3- 10 mL; mixing load approximately 25 mL. Zirconia Ceramic Vial Set: For wet or dry grinding/mixing. Vial size 21/2 in. (6.35 cm) diameter x 211/16 in. (6.8 cm) long. Set includes solid zirconia ceramic vial and slip-on cap, two 1/2 in. (12.7 mm) zirconia ceramic balls, and seven corprene gaskets. Volume 45 mL; grinding load 2–8 mL; mixing load approximately 20 mL. Zirconia Ceramic Ball, 1/2 in. (12.7 mm): 1/2 in. (12.7 mm) diameter zirconia ceramic ball for SPEX SamplePrep 8005 Vial Set. Methacrylate Vial Set: For wet or dry mixing of liquids and powders. Vial size 21/4 in. (5.7 cm) diameter x 25/8 in. (6.7 cm) long. Rugged construction allows grinding of soft materials without metallic contamination. Heavygauge methacrylate body with methacrylate- lined aluminum screw-on cap. Set includes corprene gasket, two 8006A 1/2 in. (12.7 mm) and four 3112 3/8 in. (9.5 mm) methacrylate balls. Volume 55 mL; mixing load approximately 25 mL. Methacrylate Balls, 1/2 in.: 1/2 in. (12.7 mm) diameter methacrylate balls for all SPEX SamplePrep plastic vials 3/4 in. ( 1.9 cm) and larger. Stainless Steel Vial Set: For wet or dry grinding/mixing. Vial size 21/4 in. (5.7 cm) diameter x 3 in. (7.62 cm) long. Vial body and cap liner made of hardened 440C stainless steel. Set includes screw-on cap with O-ring, two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) stainless steel balls. Volume 65 mL; grinding load 3–10 mL; mixing load approximately 25 mL. Stainless Steel Ball Set, 2 x 1/2 in & 4 x 1/4 in: Two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) hardened 440C stainless steel balls for SPEX SamplePrep 8007 Vial Set. Silicon Nitride Vial Set: For wet or dry grinding/mixing. Vial size 21/2 in. (6.35 cm) diameter x 211/16 in. (6.8 cm) long. Set includes solid silicon nitride vial and slip-on cap, two 1/2 in. (12.7 mm) silicon nitride balls, and seven corprene gaskets. Volume 45 mL; grinding load 2–8 mL; mixing load approximately 20 mL. Silicon Nitride Ball, 1/2 in. (12.7 mm): 1/2 in. (12.7 mm) diameter silicon nitride ball for SPEX SamplePrep 8008 Vial Set. Round-Ended Hardened Steel Vial Set: For wet or dry grinding/mixing. Vial size 23/8 in. (6.0 cm) diameter x 3 in. (7.62 cm) long. Hardened steel vial body has grinding chamber with rounded ends for more efficient grinding/mixing. Includes screw-on cap, O-ring, two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) steel balls. Volume 35 mL; grinding load 3–10 mL; mixing load approximately 25 mL.