SealPlate MiniStrips, Sterile

Eliminate well-to-well contamination and crossover in sensitive ELISA/EIA assays where minimizing evaporation and preventing vapor loss are critical. SealPlate Film Functional temperature range from -40°C to 120°C Perforated tabs can be removed or sealed around plate edge Can be used as secondary seal to cover films that have been pierced Available sterile and non-sterile SealPlate® 50 µm thickness polyester films minimize evaporation, prevent spillage and contamination between wells, and provide a secure seal, not just a cover. Secure sealing of all wells eliminates “edge effects” in sensitive ELISA assays. SealPlate films can also be used with tissue-culture plates for short-term storage, incubation, and containment of biohazards. SealPlate films are non-pierceable. Each film measures 79.4 by 146.1mm. Note: Completing application of sealing films by pressing with the accessory plate roller or sealing paddle assures a secure uniform seal around all wells. SealPlate Ministrips Two tabs on each strip for easy application and removal Perforated tabs can be removed or sealed around plate edge Can be used as secondary seal to cover sealing films that have been pierced Apply to plates singly or two-at-a-time MiniStrips can be applied to plates singly or two-at-a-time. SealPlate® MiniStrips™ sealing films are identical to SealPlate films above, but designed for sealing only one or two 8-well rows at a time on either strip-well or standard plates whenever rows must be selectively protected or accessed. Each MiniStrips film is 103.2 x 19.0 mm, including two positioning tabs. The long dimension with the tabs removed is 102.9mm. MiniStrips are supplied in sheets of four from which strips can be peeled individually or two-at-a-time for application to plates. Individual MiniStrips are easily peeled from sheets of four. The new four-strip-sheet format facilitates extraction from the package, handling, and removal of backing paper before application as compared to the original single-strip configuration. Sterile product is packaged in tamper-evident bags of 200. NOTE: Spacing does not permit simultaneous application of more than two strips. SealPlate RollMate SealPlate® RollMate™: An economical, efficient way to rapidly seal microplates; faster than applying single sheeted film. Application: Ideal for ELISA, incubation and storage Temperature Range: -40°C to +120°C Self-standing, non-slip supports hold pre-scored film roll securely in place for quick and easy dispensing Continuous backing liner can be torn off or fed directly into a waste basket for disposal Roll tension can be easily adjusted to user preference (e.g. loose, tight) SealPlate film minimizes evaporation, reduces cross-contamination and prevents spillage Eliminates the “edge effect”, excess evaporation in the outside wells, which can occur with other films and plate lids Useful as a simple cover to protect samples from external contamination, dust and debris 2.0mil rigid polyester film features good clarity and easy handling Single, writable end-tab for easy application and plate identification High integrity packaging prevents damage during transit; poly bag eliminates dust and particulate contamination ValueSeal™ The most economical film for general laboratory use General laboratory use, short-term storage, incubation and ELISA Temperature Range: -40°C to +120°C ValueSeal features smaller dimensions and a single non-perforated end-tab to provide a more cost-e?ective alternative to protect samples from evaporation, external contamination, dust and particulates. Provides a secure seal and is easy to remove Rigid polyester ?lm features good clarity and easy handling Can be used as a temporary seal while awaiting further processing Excel Scientific Sealing Film Selection Chart