Stainless Steel Ball Set, 1/4 in. (6.35mm)

Polystyrene Vial w/Slip-On Cap, 0.5 x 1 inch: 1/2 in. (12.7 mm) diameter x 1 in. (25.4 mm) long. Includes slip-on polyethylene cap. Volume 2.5 mL; mixing load approximately 1 mL. Accepts SPEX SamplePrep 3112 or 3119 methacrylate balls. Methacrylate Balls, 3/8 inch: Methacrylate Balls 3/8 in. (9.5 mm) diameter; fit all SPEX SamplePrep plastic vials. Stainless Steel Vial Set, 0.5 x 1 inch: 1/2 in. (12.7 mm) diameter x 1 in. (25.4 mm) long. Made of 303 stainless steel; includes slip-on cap and 1/4 in. (6.35 mm) stainless steel ball. Volume 2.5 mL; grinding load 0.2–0.6 mL; mixing load 1 mL. Stainless Steel Ball Set, 1/4 in. (6.35mm): 1/4 in. (6.35 mm) diameter stainless steel (440C) ball; for SPEX SamplePrep 3114 Vial Set. Polystyrene Vial w/Slip-On Cap, 0.5 x 2 inch: 1/2 in. (12.7 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap. Volume 5 mL; mixing load approximately 2 mL. Accepts SPEX SamplePrep 3112 or 3119 methacrylate balls. Polycarbonate Vial w/Slip-On Cap, 0.5 x 2 inch: 1/2 in. (12.7 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap. Volume 5 mL; mixing load approximately 2 mL. Accepts SPEX SamplePrep 3112 or 3119 methacrylate balls. Sold in units of 100. Hardened Tool Steel Vial Set, 0.5 x 1 inch: 1/2 in. (12.7 mm) diameter x 1 in. (25.4 mm) long. Made of hardened tool steel. Includes slip-on cap and 1/4 in. (6.35 mm) steel ball. Volume 2.5 mL; grinding load 0.2 – 0.6 mL; mixing load 1 mL. Hardened Tool Steel Balls, 1/4 inch: 1/4 in. (6.35 mm) diameter steel ball; for SPEX SamplePrep 3117 and 3127 Vial Sets. Agate Vial Set, 5/8 x 1-1/3 in.: 5/8 in. (15.9 mm) diameter x 11/3 in. (33 mm) long. Handmade from Brazilian agate; must be run inside cushioned SPEX SamplePrep 6133 vial (included). Includes stopper and 1/4 in. (6.35 mm) agate ball. Volume 1.6 mL; grinding load 0.2 – 0.6 mL; mixing load 1 mL. Agate Ball, 1/4 in. (6.35 mm): 1/4 in. (6.35 mm) diameter agate ball; for SPEX SamplePrep 3118 Vial Set. Methacrylate Balls, 1/8 in.: Methacrylate Balls 1/8 in. (3.2 mm) diameter; fit all SPEX SamplePrep plastic vials. Hardened Tool Steel Vial Set, 0.75 x 1-7/8in: 3/4 in. (19.1 mm) diameter x 17/8 in. (47.6 mm) long. Made of hardened tool steel. Includes center cylinder with two slip-on caps and 1/4 in. (6.35 mm) steel ball. Volume 5 mL; grinding load 0.5–1.0 mL; mixing load 2 mL.