Steel Pellets, 13 mm, For 3613 die

13 mm Die Set: Used to form KBr disks for IR analysis. Set includes evacuable die body, base, plunger, two 13 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction. Load limit 10 tons (9.1 metric tons); weight 2.2 lbs (1 kg). 40 mm Die Set: To form 40 mm sample disks. Set includes evacuable die body, base, plunger, two 40 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction. Load limit 50 tons (45.4 metric tons); weight 10 lbs (4.5 kg). Compatible with SPEX SamplePrep 3617 (38 mm) Spec-Caps. 40 mm Tungsten Carbide Pellets available (3614C). 40 mm Die Sleeve and Plunger: Used with 3614, 40 mm Evacuable Pellet Die and PrepAid Sample Binder. Forms stable XRF sample disks with binder matrix supporting small quantity of sample. Instructions included. 35 mm Die Set: To form 35 mm sample disks. Set includes evacuable die body, base, plunger, two 35 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction. Load limit 50 tons (45.4 metric tons); weight 8.8 lbs (4 kg). Compatible with SPEX SamplePrep 3615 (33 mm) Spec-Caps. 35 mm Tungsten Carbide Pellets available (3616C). 35 mm Die Sleeve and Plunger: Used with 3616, 35 mm Evacuable Pellet Die and PrepAid Sample Binder. Forms stable XRF sample disks with binder matrix supporting small quantity of sample. Instructions included. 31 mm Die Set: To form 31 mm standard sample disks for XRF. Set includes evacuable die body, base, plunger, two polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction. Load limit 50 tons (45.4 metric tons); weight 6.6 lbs (3 kg). Compatible with SPEX SamplePrep 3619 and 3619A Spec-Caps. 31 mm Tungsten Carbide Pellets available (3623C). 31 mm Die Sleeve and Plunger: Used with 3623, 31 mm Evacuable Pellet die and PrepAid Sample Binder. Forms stable XRF sample disks with binder matrix supporting small quantity of sample. Instructions included. Replacement Pellets: Replacement or spare steel pellets for die operation can be purchased separately. For routine pressing of abrasive materials, SPEX SamplePrep offers 31 mm, 35 mm and 40 mm tungsten carbide pellets which can be substituted for polished steel pellets. Tungsten carbide pellets are much harder than steel, but more brittle, and are not guaranteed against breakage. All replacement pellets are sold in pairs. NOTE: These products are only available for sale to Domestic U.S. Customers.