General description
SunTronic jettable insulator is a UV-curing, inkjet printable insulator coating,suitable for low-K dielectric applications, printed electronics and related applications.
The insulator can be jetted through various piezo DOD inkjet printheads, although full printhead compatibility will need to be verified in each case. The product can be cured using an un-doped medium pressure mercury source. If over printing the dielectric with a SunTronic jettable silver ink then a cure dose of 300 mJ/cm2 is recommended.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Click here for more information.
Legal Information
SunTronic is a registered trademark of Sun Chemical, Inc.
description: Cure dose required (un-doped mercury): 100-300 mJ/cm2, Jetting temperature: 50°C. form: liquid. greener alternative product characteristics: Design for Energy EfficiencyLearn more about the Principles of Green Chemistry.. surface tension: 32-37 . dyn/cm. viscosity: 11-13 . cP (at jetting temperature). greener alternative category: Enabling, . storage temp.: 2-8°C. Pictograms: GHS07,GHS08. Signal Word: Danger. Hazard Statements: H315 - H317 - H319 - H335 - H361f - H372 - H412. Precautionary Statements: P202 - P273 - P280 - P302 + P352 - P305 + P351 + P338 - P308 + P313. Hazard Classifications: Aquatic Chronic 3 - Eye Irrit. 2 - Repr. 2 - Skin Irrit. 2 - Skin Sens. 1 - STOT RE 1 - STOT SE 3. Target Organs: Respiratory system. Storage Class Code: 6.1C - Combustible, acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects. WGK: WGK 2. Flash Point(F): 204.8 °F. Flash Point(C): 96 °C.
- UPC:
- 41105316
- Condition:
- New
- Weight:
- 1.00 Ounces
- HazmatClass:
- No
- WeightUOM:
- LB
- MPN:
- 901974-250ML