Telescoping Base Stand, 6' with fixed feet, 27.5 - 33.5 hi

Available with fixed feet or casters Telescoping Base Stands with Fixed Feet: provide support for a variety of Labconco fume hoods and enclosures. Stands have removable pins to adjust the legs to eight different heights in 1" increments from 27.5" to 34.5". Four fixed leveling feet are included. Features: supports loads up to 1000 pounds; ADA-compliant; durable 1.75" tubular, epoxy-coated steel frame; rear crossbar support; glacier white exterior that complements laboratory casework and Labconco products. Base Stands of multiple widths may be mixed and matched so that their total width equals the width of the enclosure. When coupled with an accessory flat work surface, the stands may be used as an adjustable height table. Telescoping Base Stands with Casters: provide support for a variety of Labconco fume hoods and enclosures. 5" diameter, toe-locking, non-marking polyurethane casters with bearings are included. Casters add mobility and convenience when access behind the equipment is required. For low profile enclosures that do not require hard ducting, wiring or plumbing, the casters allow the enclosure to be transported from room to room or out of the way when not in use. Features: supports loads up to 1000 pounds; ADA-compliant; durable 1.75" tubular, epoxy-coated steel frame; rear crossbar support; glacier white exterior that complements laboratory casework and Labconco products. Telescoping legs are adjustable to eight height positions in 1" increments from 27.5" to 34.5". When coupled with an accessory flat work surface, the stands may be used as an adjustable height mobile table. Labconco XPress Laboratory Equipment Thomas numbers 6278Y48 and 6278Y50 are part of Labconco's XPress Laboratory Equipment Program. These items are in stock at Labconco for quick shipment. They ship in 48 hours or less! For more information and a complete listing of Labconco products available through this program, download the brochure in the Additional Info tab.