Traceable Hi-Accuracy Dual Thermometer with 1 Stainless-steel probe

Four Traceable® International Standards Digital thermometers provide the exact readings required for critical requirements, quality control checks and routine measurements. Units read 0.00, 25.00, 37.00, or a combination of all three with a resolution of 0.01° and an accuracy ±0.05°C within ±2°C of standard. Units read in °C and °F. The stainless steel probe shows the slightest temperature change and provides a triple purpose for liquid, air/gas, and semi-solids. The probe records accurate readings with tip penetration of 1/3”. Probe has a diameter of 1/8”, stem length of 6.25”, overall length of 9” and a cable length of 5 ft. Absolute high-precision thermometer is ideal for measuring temperatures in water baths, cuvets, gas systems, reagents, standards solutions, ovens, incubators, pharmaceuticals, petroleum products, foods and waste water. Display shows minimum/maximum and current temperatures Min/max monitors readings for any time period and displays the exact time and date when the min/max temperature occurred Alarm provides two visual (LEDs) and two audio alerts when temperature rises above or falls below high and low set points Unit displays the exact time and date when dual thermometer alarms are triggered Alarms are programmable in 0.01° increments Visual and audible alarms signal continuously (for days) even if temperature returns to non-alarm range High-impact, chemical-resistant ABS plastic case is: 2-3/4 x 4-1/4 x 3/4 inches. Weight is 5 ounces Stand, magnetic strips, and wall mount allow placing thermometer anywhere Takes two AA batteries To assure accuracy, an individually serial-numbered Traceable® Certificate is provided by an ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Please note: The aforementioned A2LA accreditation belongs to the manufacturer, not Thomas Scientific.