VISCOMETER, ZEITFUCHS, Calibrated, Size 10 (C08-0317-358)

Cannon ZCAC Series For measurement of kinematic viscosity of transparent and opaque Newtonian liquids Meets ASTM Standard D 445 specifications; also conform to ASTM Standard D 446 Precision: ±0.3% Also used to measure kinematic viscosity of cut-back asphalts and road oils at 140°F (60°C) and asphalt cements at 275°F (135°C) in range of 30 to 6,000 centistokes according to ASTM Standard D 2170 (see Table 3). Can be filled and cleaned while in constant temperature bath. Minimum sample volume: 1 to 3 mL . Requires liquid bath depth of 230 mm (9"). Individually boxed. Serial number is printed on the outside of the box and on the viscometer. Certificate of calibration and instruction sheet provided. Holders not included; see Thomas numbers 9726M95 and M98. For measurement of kinematic viscosity of transparent and opaque Newtonian liquids Meets ASTM Standard D 445; specifications also conform to ASTM D 446. Also used to measure kinematic viscosity of cut-back asphalts and road oils at 140°F and asphalt cements at 275°F in the range of 30 to 6000 centistokes by ASTM Standard D 2170; it is recommended that 9726-A20 or A25 Water Bath be used for work at 275° (see Table 3). Can be filled and cleaned while in constant temperature bath. Minimum sample volume: 1 to 3 mL . Require liquid bath depth of 230 mm. Precision: ±0.3%. Unity Factor viscometer constants are within 0.2% of values listed in table. Individually boxed with certificate of calibration and instruction sheet. Serial number is printed on the outside of the box and on the viscometer. Without holders. See Thomas numbers 9726M95 and M98 for holders. For measurement of kinematic viscosity of transparent and opaque Newtonian liquids Meets ASTM Standard D 445; specifications also conform to ASTM D 446 Also used to measure kinematic viscosity of cut- back asphalts and road oils at 140°F (60°C) and asphalt cements at 275°F (135°C) in range of 30 to 6,000 centistokes according to ASTM Standard D 2170 Can be filled and cleaned while in constant temperature bath Precision: ±0.3% Unity factor ZCAXC series (9723U50-U77) has constant within±0.20% of values listed Minimum sample volume: 1 to 3 mL . Requires liquid bath depth of 230 mm (9"). Certificate of calibration and instruction sheet provided. Serial number is printed on the outside of the box. Permanently attached round metal holder, for hole 51 mm (2") in diameter (see Table 3), included.